User`s guide

E5810B User’s Guide 115

Using the Telnet Utility A

Telnet commands for E5810B

Table A- 1 lists the Telnet commands you can use with the

E5810B. You should use the Telnet configuration commands

only if you are using the Telnet configuration method to

configure the E5810B. You can see a summary of all Telnet

commands online by typing “?” at any time within the Telnet

utility.

Tab le A-1 Telnet commands

Command Description

help View Help Information

? View Available Commands

config View Configured Settings

model View the Product Model

serial-num View the Device Serial Number

version View the Firmware Revision

hardware-addr View the Ethernet (MAC) Address

dhcp <ON|OFF> Turn OFF or ON the use of DHCP

ipaddr <IP Address> View/Set the IP Address

subnet-mask <IP Address> View/Set the Network Subnet Mask

gateway <IP Address> View/Set the Gateway Address

dns-server <IP Address> View/Set the DNS Server Address

host-name <string*35> View/Set the Internet Hostname

description <string*40> View/Set Device Description (UPnP Friendly Name)

upnp <ON|OFF> Turn OFF or ON the use of UPnP

lan-timeout <seconds> View/Set the LAN Timeout(Keepalive). 0 is Off.

io-timeout <seconds> View/Set the Server I/O Timeout. 0 is Off.

gpib-name <string*15> View/Set the GPIB SICL Interface Name