User`s guide

3 E5810B Web Access
Other Web Access Functions
80 E5810B User’s Guide
Troubleshooting guidelines
The E5810B records information on the firmware update
process in a system log that is viewable through the E5810B
Web access or through the E5810B Telnet interface.
1 View the system log from the E5810B Web access.
To view the system log information on the E5810B Web
access, on your Web browser address line, type:
http://<IP Address>/systemLog.htm where
<IP Address> is the IP address displayed on the E5810B
front panel display and select Enter to display the system
log. After a successful firmware update, the E5810B
systems log should show normal startup messages as
shown below.
(00:00:00.00) Selftest Passed
(00:00:00.00) Searching for DHCP Server
(00:00:00.00) GPIB initialized with name : [gpib0]
(00:00:00.00) RS232 initialized with name : [COM1]
(00:00:00.00) USB initialized with name : [usb0]
2 View the system log from Telnet.
To view the system log from Telnet, click Start and select
Run..., or right- click the bottom- left corner of the Desktop
and select Run (Windows 8). Type telnet <IP_Address>
on the Run dialog box line, where <IP_Address> is the
IP address displayed on the E5810B front panel display.
Refer to Appendix A, “Using the Telnet Utility” for more
information on the Telnet utility. When the Telnet client is
launched, you can view the system log by typing
syslog-display. After a successful firmware update,
the E5810B systems log should show normal startup
messages as shown below.
(00:00:00.00) Selftest Passed
(00:00:00.00) Searching for DHCP Server
(00:00:00.00) GPIB initialized with name : [gpib0]
(00:00:00.00) RS232 initialized with name : [COM1]
(00:00:00.00) USB initialized with name : [usb0]