Owner's manual

9
What’s in This
Guide?
A listing of the guide contents follows.
Accessing an
Electronic Copy of
This Guide
There are three ways you can access an electronic (.pdf) version of this
guide, as follows. You will need Adobe Acrobat Reader Version 3.0 or later
to view the electronic version.
 Access From the E5810A Web Access. After the E5810A is installed,
you can access an electronic version of the manual by going to the
Welcome page and clicking User’s Guide (under the E5810A
Documentation
heading).
 Access from the IO Control. If the Agilent IO Libraries Suite is
installed, a blue circled IO icon appears on the right hand side of the
Windows toolbar. To access an electronic version of this guide, click
the IO icon, then click
Documentation and then click E5810A LAN/
GPIB Users Guide
.
NOTE
This guide is NOT a tutorial on Local Area Networks (LANs) or specific
LAN operation. Consult your Information Technology (IT) department for
LAN specifics for your application.
Chapter Description
Chapter 1, “E5810A
Description,”
Describes the E5810A, including hardware description and
network operation.
Chapter 2, “Installing the
E5810A,”
Shows how to install the E5810A and the
Agilent IO Libraries Suite.
Chapter 3, “Using E5810A Web
Access,”
Shows how to use the E5810A Web access to interface with
the E5810A from your PC.
Chapter 4, “Troubleshooting
Information,”
Shows some ways to troubleshoot the E5810A, including
front panel, network, PC client, and instrument checks.
Appendix A, “E5810A
Specifications,”
Provides specifications for the E5810A.
Appendix B, “Using the Telnet
Utility,”
Provides a summary of using the Telnet utility.
“Glossary” Defines some of the technical terms used in this guide.