Agilent E5805A USB/RS232 Interface for Windows - 4 Port Agilent USB/RS232 Interface Agilent USB/RS232 Interface for Windows® - 4 Port E5805A Installation Guide Agilent Technologies
E5805A USB/RS232 Interface
Notices © Agilent Technologies, Inc. 2007 Warranty No part of this manual may be reproduced in any form or by any means (including electronic storage and retrieval or translation into a foreign language) without prior agreement and written consent from Agilent Technologies, Inc. as governed by United States and international copyright laws. The material contained in this document is provided “as is,” and is subject to being changed, without notice, in future editions.
Contents Table of Contents E5805A USB/RS232 Interface . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Cabling the E5805A USB/RS232 Interface . . . . . . . . . . . . 2 Installing the USB Hub & E5805A USB/RS232 Drivers . . . . . 3 Driver Installation For Windows XP . . . . . . . . . . . . . . . . . . 4 Driver Installation For Windows 2000 Users . . . . . . . . . . . 4 Driver Installation For Windows 98, and Me Users . . . . . 5 Interpreting the System Status Light . . . . . . . . . . . . . . . . . . .
E5805A USB/RS232 Interface 1 Installation Guide for the Agilent USB/RS232 Interface E5805A USB/RS232 Interface 2 Installing the E5805A USB/RS232 Interface Drivers 3 Interpreting the System Status Light 6 The E5805A USB/RS232 Interface Utility Program 7 Understanding the E5805A and USB Hubs 14 Support 16 E5805A USB/RS232 Interface 1
E5805A USB/RS232 Interface E5805A USB/RS232 Interface The E5805A USB/RS232 Interface is an intelligent, stackable expansion module that connects to a PC or server running Windows® 98SE, Me, 2000, or XP via the Universal Serial Bus (USB), providing high- speed serial connectivity. Cabling the E5805A USB/RS232 Interface Type A Type B Plug the Type A end of the USB cable into the USB port located in the back of your PC or into an available USB port on a standard hub.
E5805A USB/RS232 Interface Installing the E5805A USB/RS232 Interface Drivers The E5805A ships with the Driver and the Automation- Ready CDs. The Driver CD software must be installed for the product to operate. Once the Driver software is installed, the E5805A can be attached to a USB port. Your PC should be able to connect to it, and the four RS232 ports on the E5805A should appear as additional Windows® COM ports.
E5805A USB/RS232 Interface Driver Installation For Windows XP 1 You must be logged into an account with administrator privileges. 2 Insert the “Agilent Driver” CD into your CD- ROM drive. 3 After connecting the USB cable, the Found New Hardware Wizard appears. Click “Next,” and the drivers are automatically installed from the CD. There are multiple resources on the E5805A which have to be setup, so continue to install resources until the XP installation completes.
E5805A USB/RS232 Interface Driver Installation For Windows 98SE and Me 1 Insert the "Agilent Driver" CD into your CD- ROM drive. 2 After connecting the USB cable, the Add New Hardware Wizard appears. Click "Next". 3 Select "Search for the best driver for your device" and click "Next". 4 Select "Specify a location" and type in :\ Win98. Then click "Next". 5 Confirm Windows is pointing to :\Win98. Click "Next". Windows then copies over the driver files.
E5805A USB/RS232 Interface Interpreting the System Status Light Red: This light signifies a loss of USB communication with the host. If the loss is due to unplugging the unit, when the unit is reconnected the light will blink red for a few moments before turning green. Otherwise, the light indicates a problem with the drivers, which may need to be reinstalled. The red light also blinks during installation. Once the installation is complete, it should stop blinking.
E5805A USB/RS232 Interface The E5805A USB/RS232 Interface Utility Program For all Windows Operating Systems The E5805A USB/RS232 Interface configuration utility program, which is available from the Start menu, allows you to manage the serial ports of your 4 Port Interface product. N O TE For Windows 98SE and Windows Me, the configuration utility is located in C:\WINDOWS\SYSTEM\EDGEPORT.EXE.
E5805A USB/RS232 Interface The General tab in this utility allows you to do the following: 1 Information - Check the manufacturing information related to your device. 2 Configure - Reassign your device’s physical port to any available Windows COM port number from 1 to 255 and give your device a user- friendly Device Name. This capability is particularly helpful if you have more than one device.
E5805A USB/RS232 Interface Port Flags - Configure performance options and special functionality on a per- port basis. • Remap Baud: Setting the baud rate to 1200 baud will result in 230400 baud • Fast Reads: This flag is used when an application requires a read to complete immediately. In the read immediate case, the E5805A USB/RS232 Interface driver sends a request to the device asking for any buffered data to be sent. This buffered data will be included when the read completes.
E5805A USB/RS232 Interface When the Ignore Tx Purge flag is set the SERIAL_PURGE_TXCLEAR command is ignored. The function does not purge the write buffer. • Disable Plug & Play: (Windows 2k/XP only) Do not let the serial port enumerator detect devices plugged into the 4 Port Interface. • Timer Logic: (Windows 98SE only) If the application uses PortSetReadCallBack(), the notification routine is only called when the number of bytes in the receive buffer is greater then the RX trigger.
E5805A USB/RS232 Interface The Version tab allows you to check the file information related to the software. There is no graphic of this tab.
E5805A USB/RS232 Interface The Advanced tab allows you to do the following: • Uninstall the drivers. • Enable Event Logging – Place event messages in the system event log. • Configure how COM ports are assigned. The driver supports COM port number assignment in two ways: 1 Assign COM ports based on the converter serial number. This is the default setting.
E5805A USB/RS232 Interface In this mode, the driver identifies a converter based on the physical USB port where it is connected. This effectively assigns COM port numbers to physical USB ports. No matter which converter is plugged into a given USB port, it uses the COM port numbers assigned to that USB port.
E5805A USB/RS232 Interface Understanding the E5805A and USB Hubs Hubs, critical components in the USB architecture, are wiring concentrators that enable the attachment of multiple devices, thus converting a single attachment point into multiple attachment points. USB architecture allows a cascaded multiple hub configuration with certain power limitations (explained later in this section). See Figure 1.
E5805A USB/RS232 Interface can be connected to a bus- powered hub, which obtains power from its upstream host and provides up to 100 mA for each downstream port. Due to the limited available power for bus- powered hubs, cascading two bus- powered hubs is an illegal topology, and devices connected to the second hub will not function. USB specifications limit the connection of a bus- powered hub to a self- powered hub or host only.
E5805A USB/RS232 Interface Support All support can be reached by contacting a call center. For your nearest call center, go to http://www.agilent.
A E5805A Specifications
E5805A Specifications This appendix lists E5805A Agilent USB/RS232 Interface Technical Specifications and Supplementary Information.
E5805A Specifications Technical Specifications Technical Specifications General Requirements Minimum System Requirements Windows 98 Second Edition /Me/2000/XP Professional (Windows Vista is not supported). A USB port (OS may require more resources) Supported Standards USB 1.0, 1.1 compatible; backwards compatible for USB 2.0 General Characteristics Power External power supply not required (USB powered) Maximum Power - 2.
E5805A Specifications Technical Specifications 20 Appendix A
DECLARATION OF CONFORMITY According to ISO/IEC Guide 22 and CEN/CENELEC EN 45014 Manufacturer’s Name: Agilent Technologies, Incorporated Manufacturer’s Address: 815 – 14th St. SW Loveland, Colorado 80537 USA Declares, that the product Product Name: USB/4-port RS232 Interface Model Number: E5805A Product Options: This declaration covers all options of the above product(s).
Supplemental Information: [1] This product was tested in a typical configuration with Agilent Technologies test systems. [2] This Class B digital apparatus complies with Canadian ICES-003. [3] Cet appareil numerique de la classe B est conforme a la norme NMB-003 du Canada. 27 September 2004 Date Ray Corson Product Regulations Program Manager For further information, please contact your local Agilent Technologies sales office, agent or distributor.
E5805A USB/RS232 1 Agilent USB/RS232 インストール ガイド インタフェース 1 インタフェース インタフェース 24 インタフェース ドライバのインストール 25 システム ステータス ランプの説明 28 E5805A USB/RS232 インタフェースのユーティリティ・プログラム E5805A と USB ハブについて 36 サポート 38 E5805A USB/RS232 E5805A USB/RS232 E5805A USB/RS232 インタフェース 29 23
1 E5805A USB/RS232 インタフェース E5805A USB/RS232 インタフェース インタフェースは高機能で、スタック ( 積み重ね ) 可能な拡張モジュールです。Windows 98SE/Me/2000/XP が動作して いる PC またはサーバに USB ( ユニバーサル シリアル バス ) 経由で接続 し、高速シリアル接続が可能です。 E5805A USB/RS232 E5805A USB/RS232 インタフェースのケーブル接続 タイプ B タイプ USB ケーブルのプラグ (A タイプ ) を、PC 背面にある USB ポートか、標 準的なハブの USB ポートに接続します。USB ケーブルのプラグ (B タイ プ ) を E5805A USB/RS232 インタフェースの背面に接続します。 ドライバがインストールされていない場合は、次のページの「E5805A USB/ RS232 インタフェース ドライバのインストール」を参照してください。 A 24 E5805A USB/RS232 インタフェース
E5805A USB/RS232 E5805A USB/RS232 インタフェース 1 インタフェース ドライバのインストール E5805A には、ドライバ CD と オートメーションレディ CD が付属して います。本製品を使用するには、ドライバ CD のソフトウェアをインストー ルする必要があります。ドライバ・ソフトウェアをインストールすると、 E5805A を USB ポートから使用できるようになります。E5805A を PC の USB ポートに接続すると、E5805A の 4 つの RS232 ポートは追加の Windows® COM ポートとして認識されます。これらのポートは、シリア ル接続機器や汎用デバイスの接続に使用できます。E5805A には IO ライ ブラリ CD が付属しており、I/O ライブラリ (VISA、VISA COM、SICL など ) を使用して機器やデバイスのプログラムを作成できます。また、この CD には接続管理やインタラクティブな機器制御のためのツール セットも 含まれています。VISA やその他の T&M 専用ソフトウェアを使用して機器 のプログラムを作成す
1 E5805A USB/RS232 インタフェース Windows XP 1 2 3 用ドライバのインストール 管理者権限を持つアカウントでログインします。 Agilent ドライバ CD を CD- ROM ドライブに挿入します。 新しいハードウェアの検出ウィザードが画面に表示されたら、[ 次へ ] を クリックします。ドライバは CD から自動的にインストールされます。 E5805A の複数のリソースがセットアップされる必要があるので、 Windows XP でのインストールが完了するまでリソースのインストー ルを続行します。 Windows 2000 用ドライバのインストール 管理者権限を持つアカウントでログインします。 2 Agilent ドライバ CD を CD- ROM ドライブに挿入します。 3 新しいハードウェアの検出ウィザードが画面に表示されたら、[ 一覧また は特定の場所からインストールする ( 詳細 )] を選択し、[ 次へ ] をクリッ クします。 4 [ 使用中のデバイスに最適なドライバを検索する ] を選択し、[ 次へ ] をク リックします。 5 [ 場所を指定
E5805A USB/RS232 インタフェース 1 の複数のリソースがセットアップされる必要があるので、 でのインストールが完了するまでリソースのインストー ルを続行します。 9 ドライバ ファイルのインストールが終了します。 10 [ 完了 ] を選択し、ドライバのインストールを完了します。 ダイアログが画面から消えたら、インストールは完了です。これで新しい COM ポートが使用できるようになりました。新しい COM ポートには、シ ステムの既存のポートの番号に続く番号が付けられます。 8 E5805A Windows XP Windows 98SE/Me 用ドライバのインストール ドライバ CD を CD- ROM ドライブに挿入します。 2 USB ケーブルを接続した後に、新しいハードウェアの追加ウィザードが 画面に表示されます。[ 次へ ] をクリックします。 3 [ 使用中のデバイスに最適なドライバを検索する ] を選択し、[ 次へ ] をク リックします。 4 [ 場所を指定 ] を選択し、 「:¥Win98」と入力します。 [ 次へ ] をクリックします。
1 E5805A USB/RS232 インタフェース システム ステータス ランプの説明 赤 : ホストとの USB 通信が切断されたことを示します。装置からプラグが はずれたために通信が切断された場合は、装置を再接続するとランプが赤で しばらく点滅した後で緑に変わります。それ以外の場合はドライバに問題が 生じたことを示し、再インストールが必要となることもあります。インス トール中も、赤のランプが点滅します。インストールが完了すると、点滅し なくなります。 黄 : E5805A USB/RS232 インタフェースのシリアル ポートの動作を示 します。インストール中に黄色のランプが一瞬点滅する場合もあります。 緑 : シリアル ポートが正常に設定され、E5805A USB/RS232 インタ フェースが正常に動作していることを示します。 28 E5805A USB/RS232 インタフェース
E5805A USB/RS232 E5805A USB/RS232 プログラム インタフェース 1 インタフェースのユーティリティ・ 全 Windows オペレーティング システム共通 インタフェース設定ユーティリティ・プログラムを 使用して、 ポート インタフェース製品のシリアル ポートを管理できます。 プログラムは スタート メニューから起動します。 E5805A USB/RS232 4 [ ] このユーティリティの [General ( 全般 )] タブでは、以下の作業が行えます。 E5805A USB/RS232 インタフェース 29
1 E5805A USB/RS232 インタフェース 情報 ): デバイスに関連した製造情報を確認できます。 Configure ( 設定): デバイスの物理ポートを 1 から 255 までの使用可 能な Windows COM ポート番号に割り当て直し、デバイスにわかりや すい名前を付けます。この機能は、複数のデバイスを使用する場合に特 に便利です。 1 Information ( 2 ? 30 E5805A USB/RS232 インタフェース
E5805A USB/RS232 インタフェース 1 ポート フラグ ): パフォーマンスに関するオプションや特 殊機能をポート別に設定します。 Remap Baud ( ボーレートの再マッピング ): ボー レートを 1200 に 設定すると、230400 ボーになります。 Fast Reads ( 高速読み取り ): このフラグは、アプリケーションで読み取りを即座に完了させる必要が ある場合に使用します。高速読み取りの場合、E5805A USB/RS232 インタフェース ドライバは、バッファに格納されたデータを送信するよ うリクエストをデバイスに送信します。バッファに格納されたデータは、 読み取りが完了すると取り込まれます。このフラグをオンにすると、ド ライバはデバイスに追加データを照会しません。 Fast Writes ( 高速書き込み): アプリケーションが書き込みリクエスト をドライバに送信すると、デフォルトでは E5805A USB/RS232 イン タフェース ドライバはすべてのデータがデバイスから送信されるまで待 機してから書き込みを完了します。[Fast Writes ( 高速書き込
1 E5805A USB/RS232 インタフェース 削除を無視 )] フラグをオンにすると、 コマンドは無視されます。この機能で は、書き込みバッファの削除は実行されません。 Disable Plug & Play ( プラグアンドプレイを無効にする ): (Windows 2000/ XP のみ ) シリアル ポート エミュレータが 4 ポート インタフェースに接続された デバイスを検出しないようにします。 Timer Logic ( タイマ ロジック ): (Windows 98SE のみ ) アプリケーションが PortSetReadCallBack() を使用する場合、受信 バッファ内のバイト数が RX トリガより大きくなったときのみ通知ルー チンが呼び出されます。Microsoft シリアル VxD にも、RX バッファ 内に一定量のデータが存在するが、200 ミリ秒以内に新しいデータが受 信されなかった ( 受信側がアクティブでなくなった ) 場合に通知ルーチ ンを起動するタイマが実装されています。 E5805A USB/RS232 インタフェースのバッファリングの特性のた め、この動作をデ
E5805A USB/RS232 インタフェース 1 [Version ( バージョン )] タブでは、ソフトウェアに関連したファイル情報 を確認できます。 E5805A USB/RS232 インタフェース 33
1 E5805A USB/RS232 インタフェース 詳細 )] タブでは、以下の処理を実行できます。 • ドライバのアンインストール • イベントのログ記録 ( イベント メッセージをシステム イベント ログ に記録 ) • COM ポートの割り当て方法の設定 ドライバでは、以下の 2 つの方法で COM ポート番号の割り当てができます。 1 コンバータのシリアル番号に基づいて COM ポートを割り当てる。 これはデフォルトの設定です。このモードでは、ドライバは各コンバー タのシリアル番号を使用してコンバータを一意に識別し、シリアル番号 に基づいて指定のコンバータに COM ポートを割り当てます。コンバー タがどの物理 USB ポートに接続されているかに関係なく、割り当てら れた COM ポート番号は保持されます。 2 物理 USB ポートに基づいて COM ポートを割り当てる。 [Advanced ( 34 E5805A USB/RS232 インタフェース
E5805A USB/RS232 インタフェース 1 このモードでは、ドライバはコンバータが接続されている物理 USB ポート に基づいてコンバータを識別し、COM ポート番号を割り当てます。USB ポートにどのコンバータが接続されているかに関係なく、USB ポートに割 り当てられている COM ポート番号が使用されます。このため、コンバータ を新しい装置に交換することが可能です。新しい装置のシリアル番号が異 なっていても、同じ USB ポートに接続されているため古い装置に割り当て られたのと同じ COM ポート番号が割り当てられます。 このモードの場合、コンバータはシリアル番号ではなく、接続先の USB ポートを識別する 2 ~ 7 桁の番号で識別されます。 この設定を変更した場合、変更を有効にするために再起動する必要があり ます。 E5805A USB/RS232 インタフェース 35
1 E5805A USB/RS232 E5805A インタフェース と USB ハブについて アーキテクチャの重要なコンポーネントであるハブは、単一接続ポイ ントをマルチ接続ポイントに変換し、複数のデバイスの接続を可能にする集 線装置です。USB アーキテクチャでは、( このセクションで後に説明する ) 一定の電力制限を伴ったカスケード型のマルチ ハブ構成が可能です。図 1 を参照してください。 USB 図1 ハブのアーキテクチャ 各ハブには、ホストに接続するアップストリーム ポート、ダウンストリーム デバイス (別のハブを含む) に接続する複数のダウンストリーム ポートがあ ります。ハブはダウンストリーム デバイスの接続および取り外しを検出し、 基本ハードウェアおよびオペレーティング システム経由でのダウンスト リーム デバイスへの電力供給を有効にして、それを監視します。 各 USB デバイスは必要とする電力をオペレーティング システムに報告し、 オペレーティング システムは必要な電力と使用可能な電力量に応じて、デバ イスを有効化または無効化します。高電力デバイスは通常、セルフ・パワー ド・ハブに
E5805A USB/RS232 インタフェース 1 バス・パワード・ハブで使用できる電力は限られているため、2 つのバス・ パワード・ハブのカスケード接続は無効で、2 番目のハブに接続されたデバ イスは機能しません。USB の仕様では、バス・パワード・ハブの接続先を セルフ・パワード・バスまたはホストのみに制限しています。 USB の仕様によると、カスケード接続では、最大 5 台のハブを連続して接 続することができます。つまり、デバイスとホストとの間に最大 5 台のハブ を接続できます。これは、システムにおけるハブの最大数が 5 台であるとい う意味ではありません。実際には、どのレベルにおいても最大 7 台のハブを 並列で接続できます。ダウンストリーム ハブの数は、外部ハブと内蔵ハブの 両方を含めて計算する必要があります。 注 E5805A USB/RS232 インタフェース はバス・パワード・デバイスであるため、バス・パワード・ハブに 接続しないでください。 E5805A 37
1 E5805A USB/RS232 インタフェース サポート サポートが必要な場合は、カスタマ センタにご連絡ください。最寄りのカス タマ センタの連絡先は、http://www.agilent.co.
A E5805A の仕様
E5805A の仕様 この付録には、E5805A Agilent USB/RS232 インタフェースの技術仕様と補足情報 が記載されています。 40 付録 A
の仕様 技術仕様 E5805A 一般要件 最小システム要件 技術仕様 Windows 98 Second Edition/Me/2000/XP Professional (Windows Vista をサポー ト されません USB (OS ) 。 ポート によっては追加リソースが必要 USB 1.0、1.1 互換。USB 2.
E5805A 技術仕様 42 の仕様 付録 A
www.agilent.