User`s guide

Agilent Technologies E5500 Phase Noise Measurement System 14-3
Baseband Noise Measurement Examples
Baseband Noise using a Test Set Measurement Example
4. Choose the OK button. The appropriate measurement definition
parameters for this example have been pre-stored in this file. (Table on
page 14-4) lists the parameter data that has been entered for this
measurement example.) a Test Set Measurement
Beginning the
Measurement
1. From the Measurement menu, choose New Measurement.
2. When the Perform a New Calibration and Measurement dialog box
appears, click OK.
3. When the Connect Diagram appears on the computer’s display, click on
the hardware down arrow and select “HP 70420A option 001 test set
only” from the pull-down list.
Figure 14-1 Connect Diagram for the Baseband using a Test Set Measurement