User`s guide

Agilent Technologies E5500 Phase Noise Measurement System 11-1
11 FM Discriminator Measurement Examples
What You’ll Find in This Chapter
•
FM Discriminator Measurement using Double-Sided Spur
Calibration,page11-3
• Discriminator Measurement using FM Rate and Deviation
Calibration, page 11-18.
CAUTION To prevent damage to the Agilent/HP 70420A test set’s hardware
components, the input signal must not be applied to the signal input
connector until the input attenuator (Agilent/HP 70420A Option 001) has
been correctly set for the desired configuration, as show in Table 11-2 on
page 11-11. Apply the input signal when the Connection Diagram appears.