Installation guide

1-38 Agilent Technologies E5500A Installation Guide
Welcome to the E5500A Phase Noise Measurement System Series of
Solutions
Step 11. Running the System Confidence Test
This measurement demonstration will introduce you to the system’s
operation by guiding you through an actual phase noise measurement.
This first measurement tests the Agilent/HP 70420A Test Set’s low-noise
amplifier circuitry. The phase detectors are not tested. This measurement
will also confirm that the PC and phase noise test set are communicating
with each other.
1. From the File menu, choose Open.
2. If necessary, choose the drive or directory where the file you want is
stored.
3. In the File Name box, choose Confidence.pnm.
4. Click the Open button.