Installation guide

Agilent Technologies E5500A Installation Guide 1- 37
Welcome to the E5500A Phase Noise Measurement System Series of
Solutions
3. From the Test Set pull-down list, select Agilent/HP 70420A. Click the
Check I/O button. A green check-mark will appear after the I/O check
has been performed by the software. If a red circle with a slash appears,
return to the Asset Manager (click the Asset Manager button) and
verify that the Agilent/HP 70420A and VXI-Digitizer are configured
correctly (check that the license key has been entered correctly). Also
check your system hardware connections. Click the Check I/O button
for a re-check.
4. From the FFT Analyzer pull-down list, select Agilent/HP E1430A.
Click the Check I/O button. A green check-mark will appear after the
I/O check has been performed by the software.
Selecting both the Agilent/HP 70420A test set and the Agilent/HP
E1430A FFT Analyzer (VXI digitizer) will tie both assets to the
confidence test we will be performing in the next step.