Installation guide

1-30 Agilent Technologies E5500A Installation Guide
Welcome to the E5500A Phase Noise Measurement System Series of
Solutions
24. In the Asset Name box, type Agilent/HP E1430A.
25. In the Serial Number (optional) box, type the serial number for your
VXI-digitizer. Click the Next button.
26. From the Baseband Source pull-down list, select (none).
NOTE If you had previously configured an Agilent/HP E1441A VXI Arb into the
Asset Manager for use as a baseband noise source for PLL loop suppression
verification, that option would also be available and you would select it here.
27. Click the Next button.