Installation guide

Agilent Technologies E5500B Installation Guide 1-5
Welcome to the E5500B Phase Noise Measurement System Series of
Solutions
Step 1. Unpacking Your System
1. Unpack and inspect the shipping container and its contents thoroughly to
ensure that nothing was damaged during shipment.
If the container or packing material is damaged, the contents should be
checked both mechanically and electrically. If the contents are damaged
or defective, contact your nearest Agilent Technologies Sales and
Service office. Keep the shipping materials for the carrier’s inspection.
2. Verify that all parts and materials were included in the shipping
container:
• E5500 Phase Noise Measurement System CD-ROM
• E5500 Software Keyword Licence Certificate
• E5500 User’s Guide
• E5500B Installation Guide
• 9300-1408 Disposable Grounding Strap (Option 1FF)
• 5957-4369 Electrostatic Discharge (ESD) Warning Pamphlet
• PC-Digitizer Card (Option 1FF)
Table 1-2 Connectors and Adapters
Part Number Description
Agilent/HP
70420A
Agilent/HP
70420A
Option 001
Agilent/HP
70420A
Option 201
Agilent/HP
70422A
1250-0207 BNC, 50 ohm Termination 1 1 1
1250-0780Adapter,N(m)-BMC(f) 3231
1250-1250 Adapter, N(m) - SMA(f) 1 2
1250-2015 Adapter, SMA(f) - BNC(m) 1
5061-5311 Adapter/Saver, 3.5mm(f) - 3.5mm(f) 2 2
1250-1200 Adapter, SMA(m) - BNC(f) 2