User`s guide
Table Of Contents
- Agilent E5061A/E5062A ENA Series ENA Series RF Network Analyzers
- 1 Making Effective Use of This Manual
- 2 Overview of Remote Control
- 3 Setting Up the Analyzer
- 4 Performing a Calibration
- 5 Making a Measurement
- 6 Analyzing Data
- 7 Reading/Writing Measurement Data
- 8 Limit Test
- 9 Saving and Recalling (File Management)
- 10 Communication with External Instruments Using Handler I/O Port
- 11 Working with Automatic Test Systems
- 12 Sample Application Programs
- 13 SCPI Command Reference
- Notational conventions in this command reference
- IEEE Common Commands
- E5061A/E5062A commands
- :ABOR
- :CALC{1-4}:BLIM
- :CALC{1-4}:BLIM:DB
- :CALC{1-4}:BLIM:DISP:MARK
- :CALC{1-4}:BLIM:DISP:VAL
- :CALC{1-4}:BLIM:FAIL?
- :CALC{1-4}:BLIM:MAX
- :CALC{1-4}:BLIM:MIN
- :CALC{1-4}:BLIM:REP?
- :CALC{1-4}:CONV
- :CALC{1-4}:CONV:FUNC
- :CALC{1-4}:CORR:EDEL:TIME
- :CALC{1-4}:CORR:OFFS:PHAS
- :CALC{1-4}:DATA:FDAT
- :CALC{1-4}:DATA:FMEM
- :CALC{1-4}:DATA:SDAT
- :CALC{1-4}:DATA:SMEM
- :CALC{1-4}:FORM
- :CALC{1-4}:FUNC:DATA?
- :CALC{1-4}:FUNC:DOM
- :CALC{1-4}:FUNC:DOM:COUP
- :CALC{1-4}:FUNC:DOM:STAR
- :CALC{1-4}:FUNC:DOM:STOP
- :CALC{1-4}:FUNC:EXEC
- :CALC{1-4}:FUNC:PEXC
- :CALC{1-4}:FUNC:POIN?
- :CALC{1-4}:FUNC:PPOL
- :CALC{1-4}:FUNC:TARG
- :CALC{1-4}:FUNC:TTR
- :CALC{1-4}:FUNC:TYPE
- :CALC{1-4}:LIM
- :CALC{1-4}:LIM:DATA
- :CALC{1-4}:LIM:DISP
- :CALC{1-4}:LIM:DISP:CLIP
- :CALC{1-4}:LIM:FAIL?
- :CALC{1-4}:LIM:OFFS:AMPL
- :CALC{1-4}:LIM:OFFS:MARK
- :CALC{1-4}:LIM:OFFS:STIM
- :CALC{1-4}:LIM:REP:ALL?
- :CALC{1-4}:LIM:REP?
- :CALC{1-4}:LIM:REP:POIN?
- :CALC{1-4}:MARK:BWID
- :CALC{1-4}:MARK:COUP
- :CALC{1-4}:MARK:FUNC:DOM
- :CALC{1-4}:MARK:FUNC:DOM:COUP
- :CALC{1-4}:MARK:FUNC:DOM:STAR
- :CALC{1-4}:MARK:FUNC:DOM:STOP
- :CALC{1-4}:MARK:FUNC:MULT:PEXC
- :CALC{1-4}:MARK:FUNC:MULT:PPOL
- :CALC{1-4}:MARK:FUNC:MULT:TARG
- :CALC{1-4}:MARK:FUNC:MULT:TRAC
- :CALC{1-4}:MARK:FUNC:MULT:TTR
- :CALC{1-4}:MARK:FUNC:MULT:TYPE
- :CALC{1-4}:MARK:MATH:FLAT
- :CALC{1-4}:MARK:MATH:FLAT:DATA?
- :CALC{1-4}:MARK:MATH:FST
- :CALC{1-4}:MARK:MATH:FST:DATA?
- :CALC{1-4}:MARK:MATH:STAT
- :CALC{1-4}:MARK:MATH:STAT:DATA?
- :CALC{1-4}:MARK:NOTC
- :CALC{1-4}:MARK:REF
- :CALC{1-4}:MARK{1-10}
- :CALC{1-4}:MARK{1-10}:ACT
- :CALC{1-4}:MARK{1-10}:BWID:DATA?
- :CALC{1-4}:MARK{1-10}:BWID:THR
- :CALC{1-4}:MARK{1-10}:DISC
- :CALC{1-4}:MARK{1-10}:FUNC:EXEC
- :CALC{1-4}:MARK{1-10}:FUNC:PEXC
- :CALC{1-4}:MARK{1-10}:FUNC:PPOL
- :CALC{1-4}:MARK{1-10}:FUNC:TARG
- :CALC{1-4}:MARK{1-10}:FUNC:TRAC
- :CALC{1-4}:MARK{1-10}:FUNC:TTR
- :CALC{1-4}:MARK{1-10}:FUNC:TYPE
- :CALC{1-4}:MARK{1-10}:NOTC:DATA?
- :CALC{1-4}:MARK{1-10}:NOTC:THR
- :CALC{1-4}:MARK{1-10}:SET
- :CALC{1-4}:MARK{1-10}:X
- :CALC{1-4}:MARK{1-10}:Y?
- :CALC{1-4}:MATH:FUNC
- :CALC{1-4}:MATH:MEM
- :CALC{1-4}:MST
- :CALC{1-4}:MST:DATA?
- :CALC{1-4}:PAR:COUN
- :CALC{1-4}:PAR{1-4}:DEF
- :CALC{1-4}:PAR{1-4}:SEL
- :CALC{1-4}:RLIM
- :CALC{1-4}:RLIM:DATA
- :CALC{1-4}:RLIM:DISP:LINE
- :CALC{1-4}:RLIM:DISP:SEL
- :CALC{1-4}:RLIM:DISP:VAL
- :CALC{1-4}:RLIM:FAIL?
- :CALC{1-4}:RLIM:REP?
- :CALC{1-4}:SMO
- :CALC{1-4}:SMO:APER
- :CONT:HAND:A
- :CONT:HAND:B
- :CONT:HAND:C
- :CONT:HAND:C:MODE
- :CONT:HAND:D
- :CONT:HAND:D:MODE
- :CONT:HAND:E
- :CONT:HAND:F
- :CONT:HAND:IND:STAT
- :CONT:HAND:OUTP{1-2}
- :CONT:HAND:RTR:STAT
- :DISP:ANN:FREQ
- :DISP:CCL
- :DISP:CLOC
- :DISP:COL{1-2}:BACK
- :DISP:COL{1-2}:GRAT{1-2}
- :DISP:COL{1-2}:LIM{1-2}
- :DISP:COL{1-2}:RES
- :DISP:COL{1-2}:TRAC{1-4}:DATA
- :DISP:COL{1-2}:TRAC{1-4}:MEM
- :DISP:ECHO
- :DISP:ECHO:CLE
- :DISP:ENAB
- :DISP:FSIG
- :DISP:IMAG
- :DISP:MAX
- :DISP:SKEY
- :DISP:SPL
- :DISP:TABL
- :DISP:TABL:TYPE
- :DISP:UPD
- :DISP:WIND{1-4}:ACT
- :DISP:WIND{1-4}:ANN:MARK:ALIG
- :DISP:WIND{1-4}:ANN:MARK:SING
- :DISP:WIND{1-4}:LAB
- :DISP:WIND{1-4}:MAX
- :DISP:WIND{1-4}:SPL
- :DISP:WIND{1-4}:TITL
- :DISP:WIND{1-4}:TITL:DATA
- :DISP:WIND{1-4}:TRAC{1-4}:ANN:MARK:POS:X
- :DISP:WIND{1-4}:TRAC{1-4}:ANN:MARK:POS:Y
- :DISP:WIND{1-4}:TRAC{1-4}:ANN:YAX:MODE
- :DISP:WIND{1-4}:TRAC{1-4}:MEM
- :DISP:WIND{1-4}:TRAC{1-4}:STAT
- :DISP:WIND{1-4}:TRAC{1-4}:Y:AUTO
- :DISP:WIND{1-4}:TRAC{1-4}:Y:PDIV
- :DISP:WIND{1-4}:TRAC{1-4}:Y:RLEV
- :DISP:WIND{1-4}:TRAC{1-4}:Y:RPOS
- :DISP:WIND{1-4}:TRAC{1-4}:Y:TRAC:FREQ
- :DISP:WIND{1-4}:TRAC{1-4}:Y:TRAC:MODE
- :DISP:WIND{1-4}:X:SPAC
- :DISP:WIND{1-4}:Y:DIV
- :FORM:BORD
- :FORM:DATA
- :HCOP
- :HCOP:ABOR
- :HCOP:IMAG
- :INIT{1-4}
- :INIT{1-4}:CONT
- :MMEM:CAT?
- :MMEM:COPY
- :MMEM:DEL
- :MMEM:LOAD
- :MMEM:LOAD:CHAN
- :MMEM:LOAD:CHAN:COEF
- :MMEM:LOAD:LIM
- :MMEM:LOAD:PROG
- :MMEM:LOAD:RLIM
- :MMEM:LOAD:SEGM
- :MMEM:MDIR
- :MMEM:STOR
- :MMEM:STOR:CHAN
- :MMEM:STOR:CHAN:CLE
- :MMEM:STOR:CHAN:COEF
- :MMEM:STOR:FDAT
- :MMEM:STOR:IMAG
- :MMEM:STOR:LIM
- :MMEM:STOR:PROG
- :MMEM:STOR:RLIM
- :MMEM:STOR:SALL
- :MMEM:STOR:SEGM
- :MMEM:STOR:STYP
- :MMEM:TRAN
- :OUTP
- :PROG:CAT?
- :PROG:NAME
- :PROG:STAT
- :SENS:CORR:COLL:ECAL:PATH?
- :SENS:CORR:IMP
- :SENS{1-4}:AVER:CLE
- :SENS{1-4}:AVER
- :SENS{1-4}:AVER:COUN
- :SENS{1-4}:BAND
- :SENS{1-4}:BWID
- :SENS{1-4}:CORR:CLE
- :SENS{1-4}:CORR:COEF?
- :SENS{1-4}:CORR:COLL:CKIT
- :SENS{1-4}:CORR:COLL:CKIT:LAB
- :SENS{1-4}:CORR:COLL:CKIT:ORD:LOAD
- :SENS{1-4}:CORR:COLL:CKIT:ORD:OPEN
- :SENS{1-4}:CORR:COLL:CKIT:ORD:SHOR
- :SENS{1-4}:CORR:COLL:CKIT:ORD:THRU
- :SENS{1-4}:CORR:COLL:CKIT:RES
- :SENS{1-4}:CORR:COLL:CKIT:STAN{1-21}:ARB
- :SENS{1-4}:CORR:COLL:CKIT:STAN{1-21}:C0
- :SENS{1-4}:CORR:COLL:CKIT:STAN{1-21}:C1
- :SENS{1-4}:CORR:COLL:CKIT:STAN{1-21}:C2
- :SENS{1-4}:CORR:COLL:CKIT:STAN{1-21}:C3
- :SENS{1-4}:CORR:COLL:CKIT:STAN{1-21}:DEL
- :SENS{1-4}:CORR:COLL:CKIT:STAN{1-21}:L0
- :SENS{1-4}:CORR:COLL:CKIT:STAN{1-21}:L1
- :SENS{1-4}:CORR:COLL:CKIT:STAN{1-21}:L2
- :SENS{1-4}:CORR:COLL:CKIT:STAN{1-21}:L3
- :SENS{1-4}:CORR:COLL:CKIT:STAN{1-21}:LAB
- :SENS{1-4}:CORR:COLL:CKIT:STAN{1-21}:LOSS
- :SENS{1-4}:CORR:COLL:CKIT:STAN{1-21}:TYPE
- :SENS{1-4}:CORR:COLL:CKIT:STAN{1-21}:Z0
- :SENS{1-4}:CORR:COLL:ECAL:ERES
- :SENS{1-4}:CORR:COLL:ECAL:ISOL
- :SENS{1-4}:CORR:COLL:ECAL:SOLT1
- :SENS{1-4}:CORR:COLL:ECAL:SOLT2
- :SENS{1-4}:CORR:COLL:ECAL:THRU
- :SENS{1-4}:CORR:COLL:ISOL
- :SENS{1-4}:CORR:COLL:METH:ERES
- :SENS{1-4}:CORR:COLL:LOAD
- :SENS{1-4}:CORR:COLL:METH:OPEN
- :SENS{1-4}:CORR:COLL:METH:SHOR
- :SENS{1-4}:CORR:COLL:METH:SOLT1
- :SENS{1-4}:CORR:COLL:METH:SOLT2
- :SENS{1-4}:CORR:COLL:METH:THRU
- :SENS{1-4}:CORR:COLL:METH:TYPE?
- :SENS{1-4}:CORR:COLL:OPEN
- :SENS{1-4}:CORR:COLL:SAVE
- :SENS{1-4}:CORR:COLL:SHOR
- :SENS{1-4}:CORR:COLL:THRU
- :SENS{1-4}:CORR:EXT
- :SENS{1-4}:CORR:EXT:PORT{1-2}
- :SENS{1-4}:CORR:PROP
- :SENS{1-4}:CORR:RVEL:COAX
- :SENS{1-4}:CORR:STAT
- :SENS{1-4}:CORR:TYPE{1-4}?
- :SENS{1-4}:FREQ
- :SENS{1-4}:FREQ:CENT
- :SENS{1-4}:FREQ:DATA?
- :SENS{1-4}:FREQ:SPAN
- :SENS{1-4}:FREQ:STAR
- :SENS{1-4}:FREQ:STOP
- :SENS{1-4}:ROSC:SOUR?
- :SENS{1-4}:SEGM:DATA
- :SENS{1-4}:SEGM:SWE:POIN?
- :SENS{1-4}:SEGM:SWE:TIME?
- :SENS{1-4}:SWE:DEL
- :SENS{1-4}:SWE:POIN
- :SENS{1-4}:SWE:TIME
- :SENS{1-4}:SWE:TIME:AUTO
- :SENS{1-4}:SWE:TYPE
- :SERV:CHAN:ACT?
- :SERV:CHAN:COUN?
- :SERV:CHAN{1-4}:TRAC:ACT?
- :SERV:CHAN:TRAC:COUN?
- :SERV:PORT:COUN?
- :SOUR{1-4}:POW
- :SOUR{1-4}:POW:ATT
- :SOUR{1-4}:POW:CENT
- :SOUR{1-4}:POW:PORT:COUP
- :SOUR{1-4}:POW:PORT{1-2}
- :SOUR{1-4}:POW:SLOP
- :SOUR{1-4}:POW:SLOP:STAT
- :SOUR{1-4}:POW:SPAN
- :SOUR{1-4}:POW:STAR
- :SOUR{1-4}:POW:STOP
- :STAT:OPER?
- :STAT:OPER:COND?
- :STAT:OPER:ENAB
- :STAT:OPER:NTR
- :STAT:OPER:PTR
- :STAT:PRES
- :STAT:QUES?
- :STAT:QUES:BLIM?
- :STAT:QUES:BLIM:CHAN{1-4}?
- :STAT:QUES:BLIM:CHAN{1-4}:COND?
- :STAT:QUES:BLIM:CHAN{1-4}:ENAB
- :STAT:QUES:BLIM:CHAN{1-4}:NTR
- :STAT:QUES:BLIM:CHAN{1-4}:PTR
- :STAT:QUES:BLIM:COND?
- :STAT:QUES:BLIM:ENAB
- :STAT:QUES:BLIM:NTR
- :STAT:QUES:BLIM:PTR
- :STAT:QUES:COND?
- :STAT:QUES:ENAB
- :STAT:QUES:LIM?
- :STAT:QUES:LIM:CHAN{1-4}?
- :STAT:QUES:LIM:CHAN{1-4}:COND?
- :STAT:QUES:LIM:CHAN{1-4}:ENAB
- :STAT:QUES:LIM:CHAN{1-4}:NTR
- :STAT:QUES:LIM:CHAN{1-4}:PTR
- :STAT:QUES:LIM:COND?
- :STAT:QUES:LIM:ENAB
- :STAT:QUES:LIM:NTR
- :STAT:QUES:LIM:PTR
- :STAT:QUES:NTR
- :STAT:QUES:PTR
- :STAT:QUES:RLIM?
- :STAT:QUES:RLIM:CHAN{1-4}?
- :STAT:QUES:RLIM:CHAN{1-4}:COND?
- :STAT:QUES:RLIM:CHAN{1-4}:ENAB
- :STAT:QUES:RLIM:CHAN{1-4}:NTR
- :STAT:QUES:RLIM:CHAN{1-4}:PTR
- :STAT:QUES:RLIM:COND?
- :STAT:QUES:RLIM:ENAB
- :STAT:QUES:RLIM:NTR
- :STAT:QUES:RLIM:PTR
- :SYST:BACK
- :SYST:BEEP:COMP:IMM
- :SYST:BEEP:COMP:STAT
- :SYST:BEEP:WARN:IMM
- :SYST:BEEP:WARN:STAT
- :SYST:DATE
- :SYST:ERR?
- :SYST:KLOC:KBD
- :SYST:KLOC:MOUS
- :SYST:POFF
- :SYST:PRES
- :SYST:SEC:LEV
- :SYST:SERV?
- :SYST:TIME
- :SYST:UPR
- :TRIG
- :TRIG:SING
- :TRIG:SOUR
- Command list
- A Manual Changes
- B Status Reporting System
- C Error Messages
- Index
536 Appendix C
Error Messages
Error number:
Warning Message
A warning message is displayed in the instrument message/Warning area in the lower left
part of the display against a gray background. Pushing a front panel key or executing
:DISP:CCL command clears the message.
This message simply appears on the display, being not known to a remote environment
such as a GPIB. This message is not displayed when another error (against a red
background) has already been displayed in the instrument message/Warning area.
The warning messages for this instrument are as follows:
Cable Z out of range
This error occurs in SRL measurement function when measured average impedance is out
of the trelance (system impedance +/- 30%), and the SRL caluculation is not valid.
Fault location not allowed
This warning message is displayed when the gating/transform function of time domain
function is turned on, number of points is set 2 or sweep type is set logarithmic/segment
sweep.
The gating function and transform function are automatically turned off when this warning
message is displayed.
Log sweep requires 2 octave minimum span
If you change the sweep range that does not satisfy the necessary condition of the
frequency span (the stop frequency is about 4 times or more of the start frequency) when
the sweep type is set to the log sweep, this message is displayed.
If this message is displayed, the sweep type is automatically set to the linear sweep.
For example, if you attempt to change the log type to the log sweep when the start
frequency is set to 1 MHz and the stop frequency to 2 MHz, this error occurs.
Set the stop frequency to a value of about 4 times or more the start frequency and then set
the low seep.
Peak not found
This warning message is displayed when, with the tracking turned on, the peak specified by
the marker search has not been found by the time the sweep is finished (with the tracking
executed).
Segment table changed
This warning message is displayed when the setting specified segment by segment in the
segment table is automatically changed by a change in the other setting.
For example, this warning message is displayed when, with the power specified segment
by segment in the segment table, the power setting for a segment is adjusted by a change in
the power range setting.
Target value not found
This warning message is displayed when, with the tracking turned on, the target specified
by the marker search has not been found by the time the sweep is finished (with the
tracking executed).
This warning message is displayed also when, with the bandwidth marker displayed, the
setting for the bandwidth marker is changed at the end of the sweep, or when, with the