User`s guide

Appendix B 519
Status Reporting System
Status Register Structure
B. Status Reporting System
Issuing the *CLS command will clear all bits from the questionable status event register.
Table B-5 Status Bit Definitions of the Questionable Status Event Register
Bit
Position
Name Description
0 - 7 Not used Always 0
8 Bandwidth Test Fail (Questionable
bandwidth limit status register
summary)
Set to “1” when a transition of the condition register
occurs if the transition filters are set as valid values.
9 Ripple Test Fail (Questionable ripple
limit status register summary)
Set to “1” when a transition of the condition register
occurs if the transition filters are set as valid values.
10 Limit Test Fail (Questionable limit
status register summary)
Set to “1” when a transition of the condition register
occurs if the transition filters are set as valid values.
11 VBA Macro Interrupted Set to “1” when a VBA macro is interrupted by one of
the following reasons.
*1
• Occurrence of an execution error
• Executing “End” statement in the VBA Macro
• Executing :PROG:STAT STOP
• Operating
[Ctrl]+[Break] using the keyboard
• Operating
[Macro Break] or [Macro Setup] - Stop
using the front panel
12 - 15 Not used Always 0
*1.This setting is made after you click the End button in the dialog box displayed when the
VBA macro is interrupted.