User`s guide

Table Of Contents
Chapter 3 49
Setting Up the Analyzer
Configuring Display Settings
3. Setting Up the Analyzer
Printing a Message in the Echo Window
You can print a message in the echo window by issuing the following command:
:DISP:ECHO on page 311
You can clear any message displayed in the echo window by issuing the following
command:
:DISP:ECHO:CLE on page 311
Turning On or Off Display Update
To turn on or off the update of the LCD screen, use the following command:
:DISP:ENAB on page 312
Showing/Hiding Frequencies
To show or hide frequencies on the LCD screen, use the following command:
:DISP:ANN:FREQ on page 304
Showing or Hiding the Title
To show or hide the title, use the following command:
:DISP:WIND{1-4}:TITL on page 324
To define the title string that appears in the title display area, use the following command:
:DISP:WIND{1-4}:TITL:DATA on page 324
Configuring Date/Time Display
To show or hide the current date and time on the left-hand side of the instrument status bar,
use the following command:
:DISP:CLOC on page 305
To set the date and time, use the following command:
:SYST:DATE on page 475
:SYST:TIME on page 482
Turning On or Off the LCD Backlight
To turn on or off the LCD backlight, use the following command (note that turning off the
backlight makes the screen unreadable):
:SYST:BACK on page 472