User`s guide

Table Of Contents
482 Chapter 13
SCPI Command Reference
E5061A/E5062A commands
:SYST:TIME
Syntax :SYSTem:TIME <numeric 1>,<numeric 2>,<numeric 3>
:SYSTem:TIME?
Description Sets the time of the clock built in the E5061A/E5062A.
Parameters
If the specified parameter is out of the allowable setup range, the minimum value (if the
lower limit of the range is not reached) or the maximum value (if the upper limit of the
range is exceeded) is set.
Query response {numeric 1},{numeric 2},{numeric 3}<newline><^END>
Example of use
10 OUTPUT 717;":SYST:TIME 17,30,0"
20 OUTPUT 717;":SYST:TIME?"
30 ENTER 717;A,B,C
Related commands :SYST:DATE on page 475
:DISP:CLOC on page 305
Equivalent key
[System] - Misc Setup - Clock Setup - Set Date and Time
<numeric 1> <numeric 2> <numeric 3>
Description Hour
(24-hour basis)
Minute Second
Range 0 to 23 0 to 59 0 to 59
Resolution 1 1 1