User`s guide

Table Of Contents
Chapter 13 469
SCPI Command Reference
E5061A/E5062A commands
13. SCPI Command
Reference
:STAT:QUES:RLIM:ENAB
Syntax :STATus:QUEStionable:RLIMit:ENABle <numeric>
:STATus:QUEStionable:RLIMit:ENABle?
Description Sets the value of the Questionable Ripple Limit Status Enable Register.
Parameters
Note that bit 5 to 15 cannot be set to 1.
Query response {numeric}<newline><^END>
Example of use
10 OUTPUT 717;":STAT:QUES:RLIM:ENAB 16"
20 OUTPUT 717;":STAT:QUES:RLIM:ENAB?"
30 ENTER 717;A
Related commands :STAT:QUES:ENAB on page 454
Equivalent key No equivalent key is available on the front panel.
<numeric>
Description Value of the enable register
Range 0 to 65535
Preset value Varies depending on the upper limit setting for channel/trace
number.
Resolution 1