User`s guide

Table Of Contents
440 Chapter 13
SCPI Command Reference
E5061A/E5062A commands
:SOUR{1-4}:POW:STOP
Syntax :SOURce{[1]|2|3|4}:POWer:STOP <numeric>
:SOURce{[1]|2|3|4}:POWer:STOP?
Description Sets the stop value of the sweep range for the power sweep for channel 1 (:SOUR1) to
channel 4 (:SOUR4).
Parameters
If the specified parameter is out of the allowable setup range, the minimum value (if the
lower limit of the range is not reached) or the maximum value (if the upper limit of the
range is exceeded) is set.
Query response {numeric}<newline><^END>
Example of use
10 OUTPUT 717;":SOUR1:POW:STOP 10"
20 OUTPUT 717;":SOUR1:POW:STOP?"
30 ENTER 717;A
Related commands :SENS{1-4}:SWE:TYPE on page 428
:SOUR{1-4}:POW:ATT on page 432
:SOUR{1-4}:POW:STAR on page 439
Equivalent key
[Stop]
<numeric>
Description Stop value
Range Varies depending on the power range.
Preset value 0
Unit dBm
Resolution 0.05