User`s guide

Table Of Contents
438 Chapter 13
SCPI Command Reference
E5061A/E5062A commands
:SOUR{1-4}:POW:SPAN
Syntax :SOURce{[1]|2|3|4}:POWer:SPAN <numeric>
:SOURce{[1]|2|3|4}:POWer:SPAN?
Description Sets the span value of the sweep range for the power sweep for channel 1 (:SOUR1) to
channel 4 (:SOUR4).
Parameters
If the specified parameter is out of the allowable setup range, the minimum value (if the
lower limit of the range is not reached) or the maximum value (if the upper limit of the
range is exceeded) is set.
Query response {numeric}<newline><^END>
Example of use
10 OUTPUT 717;":SOUR1:POW:SPAN 10"
20 OUTPUT 717;":SOUR1:POW:SPAN?"
30 ENTER 717;A
Related commands :SENS{1-4}:SWE:TYPE on page 428
:SOUR{1-4}:POW:ATT on page 432
:SOUR{1-4}:POW:CENT on page 433
Equivalent key
[Span]
<numeric>
Description Span value
Range Varies depending on the power range.
Preset value 5
Unit dBm
Resolution 0.05