User`s guide

Table Of Contents
Chapter 13 431
SCPI Command Reference
E5061A/E5062A commands
13. SCPI Command
Reference
:SOUR{1-4}:POW
Syntax :SOURce{[1]|2|3|4}:POWer[:LEVel][:IMMediate]
[:AMPLitude] <numeric>
:SOURce{[1]|2|3|4}:POWer[:LEVel][:IMMediate]
[:AMPLitude]?
Description Sets the power level of channel 1 (:SOUR1) to channel 4 (:SOUR4).
Parameters
If the specified parameter is out of the allowable setup range, the minimum value (if the
lower limit of the range is not reached) or the maximum value (if the upper limit of the
range is exceeded) is set.
Query response {numeric}<newline><^END>
Example of use
10 OUTPUT 717;":SOUR1:POW -12.5"
20 OUTPUT 717;":SOUR1:POW?"
30 ENTER 717;A
Related commands :SOUR{1-4}:POW:ATT on page 432
Equivalent key
[Sweep Setup] - Power
<numeric>
Description Power level
Range Varies depending on the power range.
Preset value 0
Unit dBm
Resolution 0.05