User`s guide

Chapter 13 411
SCPI Command Reference
E5061A/E5062A commands
13. SCPI Command
Reference
:SENS{1-4}:CORR:PROP
Syntax :SENSe{[1]|2|3|4}:CORRection:PROPerty {ON|OFF|1|0}
:SENSe{[1]|2|3|4}:CORRection:PROPerty?
Description Turns ON/OFF the display of the calibration property of channel 1 (:SENS1) to channel 4
(:SENS4).
Parameters
Query response {1|0}<newline><^END>
Example of use
10 OUTPUT 717;":SENS1:CORR:PROP ON"
20 OUTPUT 717;":SENS1:CORR:PROP?"
30 ENTER 717;A
Equivalent key [Cal] - Property
:SENS{1-4}:CORR:RVEL:COAX
Syntax :SENSe{[1]|2|3|4}:CORRection:RVELocity:COAX <numeric>
:SENSe{[1]|2|3|4}:CORRection:RVELocity:COAX?
Description For channel 1 (:SENS1) to channel 4 (:SENS4), sets the velocity factor.
Parameters
If the specified parameter is out of the allowable setup range, the minimum value (if the
lower limit of the range is not reached) or the maximum value (if the upper limit of the
range is exceeded) is set.
Query response {numeric}<newline><^END>
Example of use
10 OUTPUT 717;":SENS1:CORR:RVEL:COAX 0.7"
20 OUTPUT 717;":SENS1:CORR:RVEL:COAX?"
30 ENTER 717;A
Equivalent key [Cal] - Velocity Factor
Description
ON or 1 Turns ON the calibration property display.
OFF or 0 (preset value) Turns OFF the calibration property display.
<numeric>
Description Velocity factor
Range 0.01 to 10
Preset value 1