User`s guide

Table Of Contents
Chapter 13 403
SCPI Command Reference
E5061A/E5062A commands
13. SCPI Command
Reference
:SENS{1-4}:CORR:COLL:METH:SOLT1
Syntax :SENSe{[1]|2|3|4}:CORRection:COLLect:METHod:SOLT1 <numeric>
Description For channel 1 (:SENS1) to channel 4 (:SENS4), sets the calibration type to the full 1-port
calibration of the specified port. (No query)
Parameters
Example of use
10 OUTPUT 717;":SENS1:CORR:COLL:METH:SOLT1 1"
Related commands :SENS{1-4}:CORR:COLL:METH:TYPE? on page 405
Equivalent key
[Cal] - Calibrate - 1-Port Cal - Port
:SENS{1-4}:CORR:COLL:METH:SOLT2
Syntax :SENSe{[1]|2|3|4}:CORRection:COLLect:METHod:SOLT2 <numeric 1>,<numeric 2>
Description For channel 1 (:SENS1) to channel 4 (:SENS4), sets the calibration type to the full 2-port
calibration between the 2 specified ports. (No query)
Parameters
For each parameter, you must specify a different port number. If you specify the same port
number for 2 or more parameters, an error occurs and the command is ignored.
Example of use
10 OUTPUT 717;":SENS1:CORR:COLL:METH:SOLT2 1,2"
Related commands :SENS{1-4}:CORR:COLL:METH:TYPE? on page 405
Equivalent key
[Cal] - Calibrate - 2-Port Cal - Ports
<numeric>
Description Port number
Range 1 to 2
Resolution 1
<numeric 1> <numeric 2>
Description Port number Port number
Range 1 to 2 1 to 2
Resolution 1 1