User`s guide

Chapter 13 357
SCPI Command Reference
E5061A/E5062A commands
13. SCPI Command
Reference
:MMEM:STOR:IMAG
Syntax :MMEMory:STORe:IMAGe <string>
Description Saves the display image on the LCD display at the execution of the command into a file in
the bitmap (.bmp) or portable network graphics (.png) format.
Specify the file name with the .bmp or .png extension. If you want to specify a file on the
floppy disk drive, you need to add “A:” at the beginning of the file name. When you use
directory names and file name, separate them with “/” (slash) or “\” (backslash).
Notice that, if a file with the specified file name exists, its contents are overwritten. (No
query)
Parameters
Example of use
10 OUTPUT 717;":MMEM:STOR:IMAG ""Result/Image01.bmp"""
10 OUTPUT 717;":MMEM:STOR:IMAG ""A:Image01.png"""
Equivalent key [System] - Dump Screen Image
When performing the operation from the front panel, the image on the LCD display
memorized in the volatile memory (clipboard) (the image on the LCD display when the
[Capture] key is pressed) is saved. Notice that, if no image is memorized in the clipboard,
in the same way as the command, the image on the LCD display at the execution is
memorized in the clipboard and then it is saved.
<string>
Description File name in which you want to save the display image on the LCD
display
Range 254 characters or less