User`s guide

Table Of Contents
354 Chapter 13
SCPI Command Reference
E5061A/E5062A commands
:MMEM:STOR:CHAN
Syntax :MMEMory:STORe:CHANnel[:STATe] {A|B|C|D}
Description Saves the instrument state of the items set for the active channel (specified with the
:DISP:WIND{1-4}:ACT command) specific to that channel only into the specified register
(volatile memory).
Notice that, if an instrument state has been saved already in the specified register, its
contents are overwritten. (No query)
Parameters
Example of use
10 OUTPUT 717;":MMEM:STOR:CHAN A"
Related commands :MMEM:LOAD:CHAN on page 346
:DISP:WIND{1-4}:ACT on page 318
Equivalent key
[Save/Recall] - Save Channel - A|B|C|D
:MMEM:STOR:CHAN:CLE
Syntax :MMEMory:STORe:CHANnel:CLEar
Description Deletes the instrument state for each channel (saved with the :MMEM:STOR:CHAN
command) in all the registers. (No query)
Example of use
10 OUTPUT 717;":MMEM:STOR:CHAN:CLE"
Related commands :MMEM:STOR:CHAN on page 354
Equivalent key
[Save/Recall] - Save Channel - Clear States - OK
Description
A Specifies register A.
B Specifies register B.
C Specifies register C.
D Specifies register D.