User`s guide

Table Of Contents
350 Chapter 13
SCPI Command Reference
E5061A/E5062A commands
:MMEM:LOAD:RLIM
Syntax :MMEMory:LOAD:RLIMit <string>
Description As the ripple limit table for the active trace (specified with the
:CALC{1-4}:PAR{1-4}:SEL command) of the active channel (specified with the
:DISP:WIND{1-4}:ACT command), recalls the specified ripple limit table file (file with
the .csv extension saved with the :MMEM:STOR:RLIM command).
Specify the file name with the extension. If you want to specify a file on the floppy disk
drive, you need to add “A:” at the beginning of the file name. When you write directory
names and the file name, separate them with a “/” (slash) or “\” (backslash).
If the specified file does not exist, an error occurs and the command is ignored. (No query)
Parameters
Example of use
10 OUTPUT 717;":MMEM:LOAD:RLIM ""RTest1/Rlim01.csv"""
10 OUTPUT 717;":MMEM:LOAD:RLIM ""A:Rlim01.csv"""
Related commands :MMEM:STOR:RLIM on page 360
:DISP:WIND{1-4}:ACT on page 318
:CALC{1-4}:PAR{1-4}:SEL on page 286
Equivalent key
[Analysis] - Ripple Limit - Edit Ripple Limit - Import from CSV File
<string>
Description File name of the ripple limit table.
Range 254 characters or less