User`s guide

Table Of Contents
Chapter 13 347
SCPI Command Reference
E5061A/E5062A commands
13. SCPI Command
Reference
:MMEM:LOAD:CHAN:COEF
Syntax :MMEMory:LOAD:CHANnel:COEFficient {A|B|C|D}
Description Recalls the calibration coefficient for an individual channel (saved with the
:MMEM:STOR:CHAN:COEF command) from the specified register as the setting of the
active channel (specified with the :DISP:WIND{1-4}:ACT command).
It is possible to recall the register from a different channel where it was saved.
If no instrument state has been saved in the specified register, an error occurs and the
command is ignored. (No query)
Parameters
Example of use
10 OUTPUT 717;":MMEM:LOAD:CHAN:COEF A"
Related commands
Equivalent key
[Save/Recall] - Recall Channel - Cal Only A|B|C|D
NOTE The calibration coefficient registers A to D are different from the channel state registers A
to D. :MMEM:STOR:CHAN command does not affect the calibration coefficient registers.
Description
A Specifies register A.
B Specifies register B.
C Specifies register C.
D Specifies register D.