User`s guide

Table Of Contents
Chapter 13 333
SCPI Command Reference
E5061A/E5062A commands
13. SCPI Command
Reference
:DISP:WIND{1-4}:TRAC{1-4}:Y:TRAC:FREQ
Syntax :DISPlay:WINDow{[1]|2|3|4}:TRACe{[1]|2|3|4}:Y:TRACk:FREQuency <value>
:DISPlay:WINDow{[1]|2|3|4}:TRACe{[1]|2|3|4}:Y:TRACk:FREQuency?
Description For trace 1 (:TRAC1) through trace 4 (:TRAC4) of channel 1 (:WIND1) to channel 4
(:WIND4), sets a frequency when you want to specify a frequency on trace data as the
reference value. Tracking is not performed when the specified frequency lies outside the
preset range. When a frequency that does not match any measurement point is specified,
interpolation is performed using the preceding and following measurement points, and the
resulting value is used as the reference value for tracking.
Parameters
Query response {value}<newline><^END>
Example of use
10 OUTPUT 717;":DISP:WIND1:TRAC1:Y:TRAC:FREQ 1E9"
20 OUTPUT 717;":DISP:WIND1:TRAC1:Y:TRAC:FREQ?"
30 ENTER 717;A
Related commands :DISP:WIND{1-4}:Y:DIV on page 336
:DISP:WIND{1-4}:TRAC{1-4}:Y:TRAC:MODE on page 334
Equivalent key
[Scale] - Reference Tracking - Track Frequency
<value>
Description Frequency for tracking
Range -1E12 to 1E12
Preset value 0
Unit Hz (hertz), dBm, or s (seconds)