User`s guide

Table Of Contents
326 Chapter 13
SCPI Command Reference
E5061A/E5062A commands
:DISP:WIND{1-4}:TRAC{1-4}:ANN:MARK:POS:Y
Syntax :DISPlay:WINDow{[1]|2|3|4}:TRACe{[1]|2|3|4}:ANNotation:MARKer:POSition:Y
<value>
:DISPlay:WINDow{[1]|2|3|4}:TRACe{[1]|2|3|4}:ANNotationMARKer:POSition:Y?
Description For trace 1 (:TRAC1) through trace 4 (:TRAC4) of channel 1 (:WIND1) to channel 4
(:WIND4), sets the Y-axis position where the marker value is displayed as the percentage
of the display area height.
Parameters
Query response {value}<newline><^END>
Example of use
10 OUTPUT 717;":DISP:WIND1:TRAC1:ANN:MARK:POS:Y 40"
20 OUTPUT 717;":DISP:WIND1:TRAC1:ANN:MARK:POS:Y?"
30 ENTER 717;A
Related commands :DISP:WIND{1-4}:TRAC{1-4}:ANN:MARK:POS:X on page 325
Equivalent key
[Marker Fctn] - Annotation Options - Marker Info Y Pos
<value>
Description Y-axis position where the marker value is displayed.
Range -15 to 100
Preset value 1
Unit % (percent)
Resolution 1