User`s guide

Table Of Contents
322 Chapter 13
SCPI Command Reference
E5061A/E5062A commands
:DISP:WIND{1-4}:MAX
Syntax :DISPlay:WINDow{[1]|2|3|4}:MAXimize {ON|OFF|1|0}
:DISPlay:WINDow{[1]|2|3|4}:MAXimize?
Description Turns ON/OFF the maximization of the active trace of channel 1 (:WIND1) to channel 4
(:WIND4) (specified with the :CALC{1-4}:PAR{1-4}:SEL command).
If you turned ON the maximization, only the maximized active trace is displayed in the
window and the other traces are not displayed.
Parameters
Query response {1|0}<newline><^END>
Example of use
10 OUTPUT 717;":DISP:WIND1:MAX ON"
20 OUTPUT 717;":DISP:WIND1:MAX?"
30 ENTER 717;A
Related commands :CALC{1-4}:PAR{1-4}:SEL on page 286
:DISP:MAX on page 314
Equivalent key
[Trace Max]
Description
ON or 1 Turns ON the maximization.
OFF or 0 (preset value) Turns OFF the maximization.