User`s guide

Table Of Contents
318 Chapter 13
SCPI Command Reference
E5061A/E5062A commands
:DISP:UPD
Syntax :DISPlay:UPDate[:IMMediate]
Description Updates the LCD display once when the update of the LCD display is OFF (OFF is
specified with the :DISP:ENAB command). (No query)
Example of use
10 OUTPUT 717;":DISP:UPD"
Related commands :DISP:ENAB on page 312
Equivalent key No equivalent key is available on the front panel.
:DISP:WIND{1-4}:ACT
Syntax :DISPlay:WINDow{[1]|2|3|4}:ACTivate
Description Sets one of channel 1 (:WIND1) to channel 4 (:WIND4) to the active channel.
You can set only the displayed channel to the active channel. If you execute this command
trying to set a not displayed channel to the active channel, an error occurs and the
command is ignored. (No query)
Example of use
10 OUTPUT 717;":DISP:WIND1:ACT"
Related commands :CALC{1-4}:PAR{1-4}:SEL on page 286
Equivalent key
[Channel Prev] / [Channel Next]