User`s guide

Table Of Contents
Chapter 13 317
SCPI Command Reference
E5061A/E5062A commands
13. SCPI Command
Reference
:DISP:TABL:TYPE
Syntax :DISPlay:TABLe:TYPE {MARKer|LIMit|SEGMent|ECHO}
:DISPlay:TABLe:TYPE?
Description Selects the window whose display is turned ON/OFF with the :DISP:TABL command.
Parameters
Query response {MARK|LIM|SEGM|ECHO}<newline><^END>
Example of use
10 OUTPUT 717;":DISP:TABL:TYPE SEGM"
20 OUTPUT 717;":DISP:TABL:TYPE?"
30 ENTER 717;A$
Related commands :DISP:TABL on page 316
Equivalent key
[Sweep Setup] - Edit Segment Table
[Marker] - Marker Table
[Analysis] - Limit Test - Edit Limit Line
[Macro Setup] - Echo Window
NOTE When performing the operation from the front panel, you select the window and turn
ON/OFF the display at the same time.
Description
MARKer (preset
value)
Specifies the marker table window.
LIMit Specifies the limit test table window.
SEGMent Specifies the segment table window.
ECHO Specifies the echo window.