User`s guide

278 Chapter 13
SCPI Command Reference
E5061A/E5062A commands
:CALC{1-4}:MARK{1-10}:SET
Syntax :CALCulate{[1]|2|3|4}[:SELected]:MARKer{[1]|2|3|4|5|6|7|8|9|10}:SET {STARt|
STOP|CENTer|RLEVel|DELay}
Description For the active trace of channel 1 (:CALC1) to channel 4 (:CALC4) (specified with the
:CALC{1-4}:PAR{1-4}:SEL command), sets the value of the specified item to the value of
the position of marker 1 (:MARK1) to marker 9 (:MARK9) and reference marker
(:MARK10).
Regardless of the ON/OFF of the reference marker mode (specified with the
:CALC{1-4}:MARK:REF command), the value when the reference marker mode is OFF is
always set. (No query)
Parameters
Example of use
10 OUTPUT 717;":CALC1:MARK1:SET CENT"
Related commands :CALC{1-4}:PAR{1-4}:SEL on page 286
:CALC{1-4}:MARK:REF on page 262
Equivalent key
[Marker Fctn] - Marker -> Start|Marker -> Stop|Marker -> Center|Marker -> Reference|
Marker -> Delay
Description
STARt Sets the sweep start value to the stimulus value at the marker position.
STOP Sets the sweep stop value to the stimulus value at the marker position.
CENTer Sets the sweep center value to the stimulus value at the marker position.
RLEVel Sets the reference line value to the response value at the marker position.
DELay Sets the electrical delay time value to the group delay value at the marker
position.