User`s guide

Chapter 13 273
SCPI Command Reference
E5061A/E5062A commands
13. SCPI Command
Reference
:CALC{1-4}:MARK{1-10}:FUNC:TTR
Syntax :CALCulate{[1]|2|3|4}[:SELected]:MARKer{[1]|2|3|4|5|6|7|8|9|10}:FUNCtion:
TTRansition {POSitive| NEGative|BOTH}
:CALCulate{[1]|2|3|4}[:SELected]:MARKer{[1]|2|3|4|5|6|7|8|9|10}:FUNCtion:
TTRansition?
Description For the active trace of channel 1 (:CALC1) to channel 4 (:CALC4) (specified with the
:CALC{1-4}:PAR{1-4}:SEL command), selects the transition type when performing the
target search with marker 1 (:MARK1) to marker 9 (:MARK9) and reference marker
(:MARK10).
Parameters
Query response {POS|NEG|BOTH}<newline><^END>
Example of use
10 OUTPUT 717;":CALC1:MARK1:FUNC:TTR NEG"
20 OUTPUT 717;":CALC1:MARK1:FUNC:TTR?"
30 ENTER 717;A$
Related commands :CALC{1-4}:MARK{1-10}:FUNC:TARG on page 271
:CALC{1-4}:MARK{1-10}:FUNC:TYPE on page 274
:CALC{1-4}:PAR{1-4}:SEL on page 286
Equivalent key
[Marker Search] - Target - Target Transition
Description
POSitive Specifies positive.
NEGative Specifies negative.
BOTH (preset value) Specifies both positive and negative.