User`s guide

270 Chapter 13
SCPI Command Reference
E5061A/E5062A commands
:CALC{1-4}:MARK{1-10}:FUNC:PPOL
Syntax :CALCulate{[1]|2|3|4}[:SELected]:MARKer{[1]|2|3|4|5|6|7|8|9|10}:FUNCtion: PPOLarity
{POSitive|NEGative|BOTH}
:CALCulate{[1]|2|3|4}[:SELected]:MARKer{[1]|2|3|4|5|6|7|8|9|10}:FUNCtion:
PPOLarity?
Description For the active trace of channel 1 (:CALC1) to channel 4 (:CALC4) (specified with the
:CALC{1-4}:PAR{1-4}:SEL command), selects the polarity of the peak to be searched
with marker 1 (:MARK1) to marker 9 (:MARK9) and reference marker (:MARK10).
Parameters
Query response {POS|NEG|BOTH}<newline><^END>
Example of use
10 OUTPUT 717;":CALC1:MARK1:FUNC:PPOL NEG"
20 OUTPUT 717;":CALC1:MARK1:FUNC:PPOL?"
30 ENTER 717;A$
Related commands :CALC{1-4}:MARK{1-10}:FUNC:PEXC on page 269
:CALC{1-4}:MARK{1-10}:FUNC:TYPE on page 274
:CALC{1-4}:PAR{1-4}:SEL on page 286
Equivalent key
[Marker Search] - Peak - Peak Polarity
Description
POSitive (preset value) Specifies the positive peak.
NEGative Specifies the negative peak.
BOTH Specifies both the positive peak and the negative peak.