User`s guide

Table Of Contents
Chapter 2 27
Overview of Remote Control
LAN remote control system
2. Overview of Remote
Control
LAN remote control system
The LAN (Local Area Network) remote control system provides two methods: controlling
the E5061A/E5062A using the SICL-LAN server and controlling the E5061A/E5062A
using the telnet server.
System configuration
Use a LAN cable to connect between the E5061A/E5062A and the external controller
(computer). Figure 2-2 shows the overview of the system configuration of the LAN remote
control system.
Figure 2-2 Configuration of the LAN remote control system
Required Equipment
1. E5061A/E5062A
2. External controller (personal computer or workstation that can be connected to LAN
and Agilent I/O Library is installed into)
3. Other devices (other instruments and/or peripherals that serve your purpose)
4. LAN cable for connecting the E5061A/E5062A with the external controller
Preparing the E5061A/E5062A
Before controlling the E5061A/E5062A via LAN, you need to configure the network
function. For detailed information on the procedure, refer to Users Guide.