User`s guide

Chapter 13 263
SCPI Command Reference
E5061A/E5062A commands
13. SCPI Command
Reference
:CALC{1-4}:MARK{1-10}
Syntax :CALCulate{[1]|2|3|4}[:SELected]:MARKer{[1]|2|3|4|5|6|7|8|9|10}[:STATe]
{ON|OFF|1|0}
:CALCulate{[1]|2|3|4}[:SELected]:MARKer{[1]|2|3|4|5|6|7|8|9|10}[:STATe]?
Description For the active trace of channel 1 (:CALC1) to channel 4 (:CALC4) (specified with the
:CALC{1-4}:PAR{1-4}:SEL command), turns ON/OFF the display of marker 1
(:MARK1) to marker 9 (:MARK9) and reference marker (:MARK10).
The display of the reference marker is turned on or off when you turn on or off the
reference marker mode.
Parameters
Query response {1|0}<newline><^END>
Example of use
10 OUTPUT 717;":CALC1:MARK1 ON"
20 OUTPUT 717;":CALC1:MARK1?"
30 ENTER 717;A
Related commands :CALC{1-4}:PAR{1-4}:SEL on page 286
:CALC{1-4}:MARK:REF on page 262
Equivalent key When turning ON the display of the marker
[Marker] - Marker 1|Marker 2|Marker 3|Marker 4|Ref Marker
[Marker]
- More Markers - Marker 5|Marker 6|Marker 7|Marker 8|Marker 9
NOTE When performing the operation from the front panel, a marker set to ON is automatically
set to the active marker.
When turning OFF the display of the marker
[Marker] - Clear Marker Menu - Marker 1|Marker 2|Marker 3|Marker 4|Marker 5|
Marker 6|Marker 7|Marker 8|Marker 9|Ref Marker
Description
ON or 1 Turns ON the display of the marker.
OFF or 0 (preset value) Turns OFF the display of the marker.