User`s guide

Table Of Contents
262 Chapter 13
SCPI Command Reference
E5061A/E5062A commands
:CALC{1-4}:MARK:REF
Syntax :CALCulate{[1]|2|3|4}[:SELected]:MARKer:REFerence[:STATe] {ON|OFF|1|0}
:CALCulate{[1]|2|3|4}[:SELected]:MARKer:REFerence[:STATe]?
Description For the active trace of channel 1 (:CALC1) to channel 4 (:CALC4) (specified with the
:CALC{1-4}:PAR{1-4}:SEL command), turns ON/OFF the reference marker mode.
The reference marker mode is turned on or off when you turn on or off the display of the
reference marker.
Parameters
Query response {1|0}<newline><^END>
Example of use
10 OUTPUT 717;":CALC1:MARK:REF ON"
20 OUTPUT 717;":CALC1:MARK:REF?"
30 ENTER 717;A
Related commands :CALC{1-4}:PAR{1-4}:SEL on page 286
:CALC{1-4}:MARK{1-10} on page 263
Equivalent key
[Marker] - Ref Maker Mode
Description
ON or 1 Turns ON the reference marker mode.
OFF or 0 (preset value) Turns OFF the reference marker mode.