User`s guide

242 Chapter 13
SCPI Command Reference
E5061A/E5062A commands
:CALC{1-4}:LIM:REP?
Syntax :CALCulate{[1]|2|3|4}[:SELected]:LIMit:REPort[:DATA]?
Description For the active trace of channel 1 (:CALC1) to channel 4 (:CALC4) (specified with the
:CALC{1-4}:PAR{1-4}:SEL command), reads out the stimulus values (frequency, power
level or time) at all the measurement point that failed the limit test.
The data transfer format when this command is executed depends on the setting with the
:FORM:DATA command.(Query only)
Query response {numeric 1},…,{numeric N}<newline><^END>
Where N is the number of the measurement points that failed (can be read out with the
:CALC{1-4}:LIM:REP:POIN? command).
Example of use
10 OUTPUT 717;":CALC1:LIM:REP:POIN?"
20 ENTER 717;A
30 REDIM B(1:A)
40 OUTPUT 717;":CALC1:LIM:REP?"
50 ENTER 717;B(*)
Related commands :CALC{1-4}:PAR{1-4}:SEL on page 286
:FORM:DATA on page 338
:CALC{1-4}:LIM:REP:POIN? on page 242
:CALC{1-4}:LIM on page 232
Equivalent key No equivalent key is available on the front panel.
:CALC{1-4}:LIM:REP:POIN?
Syntax :CALCulate{[1]|2|3|4}[:SELected]:LIMit:REPort:POINts?
Description For the active trace of channel 1 (:CALC1) to channel 4 (:CALC4) (specified with the
:CALC{1-4}:PAR{1-4}:SEL command), reads out the number of the measurement points
that failed the limit test. (Query only)
Query response {numeric}<newline><^END>
Example of use
10 OUTPUT 717;":CALC1:LIM:REP:POIN?"
20 ENTER 717;A
Related commands :CALC{1-4}:PAR{1-4}:SEL on page 286
:CALC{1-4}:LIM on page 232
Equivalent key No equivalent key is available on the front panel.