User`s guide

Table Of Contents
238 Chapter 13
SCPI Command Reference
E5061A/E5062A commands
:CALC{1-4}:LIM:OFFS:AMPL
Syntax :CALCulate{[1]|2|3|4}[:SELected]:LIMit:OFFSet:AMPLitude <numeric>
:CALCulate{[1]|2|3|4}[:SELected]:LIMit:OFFSet:AMPLitude?
Description For channel 1 (:CALC1) to channel 4 (:CALC4) (specified with the
:CALC{1-4}:PAR{1-4}:SEL command), sets the limit line amplitude offset.
The setting of the limit line doesn't change even if the offset value is changed.
Parameters
Query response {numeric}<newline><^END>
Example of use
10 OUTPUT 717;":CALC1:LIM:OFFS:AMPL -10"
20 OUTPUT 717;":CALC1:LIM:OFFS:AMPL?"
30 ENTER 717;A
Related commands :CALC{1-4}:LIM on page 232
:CALC{1-4}:LIM:OFFS:MARK on page 239
:CALC{1-4}:LIM:OFFS:STIM on page 240
Equivalent key
[Analysis] - Limit Test - Limit Line Offsets - Amplitude Offset
<numeric>
Description The limit line amplitude offset value for the limit test.
Range -5E8 to 5E8
Preset value 0
Unit dB