User`s guide

Table Of Contents
Chapter 13 205
SCPI Command Reference
E5061A/E5062A commands
13. SCPI Command
Reference
:CALC{1-4}:BLIM:DISP:MARK
Syntax :CALCulate{[1]|2|3|4}[:SELected]:BLIMit:DISPlay:MARKer {ON|OFF|1|0}
:CALCulate{[1]|2|3|4}[:SELected]:BLIMit:DISPlay:MARKer?
Description For the active trace of channel 1 (:CALC1) to channel 4 (:CALC4) (specified with the
:CALC{1-4}:PAR{1-4}:SEL command), turns ON/OFF the marker display of the
bandwidth test.
Parameters
Query response {1|0}<newline><^END>
Example of use
10 OUTPUT 717;":CALC1:BLIM:DISP:MARK ON"
20 OUTPUT 717;":CALC1:BLIM:DISP:MARK?"
30 ENTER 717;A
Related commands :CALC{1-4}:PAR{1-4}:SEL on page 286
:CALC{1-4}:BLIM on page 203
:CALC{1-4}:BLIM:DISP:VAL on page 206
Equivalent key
[Analysis] - Bandwidth Limit - BW Marker
Description
ON or 1 Turns ON the bandwidth marker.
OFF or 0 (preset value) Turns OFF the bandwidth marker.