User`s guide

Table Of Contents
Chapter 6 101
Analyzing Data
Analyzing impedance
6. Analyzing Data
Analyzing impedance
By turning on the parameter conversion function, you can convert the measurement result
of the S parameter to the following parameters.
R Equivalent impedance in reflection measurement
R Equivalent impedance in transmission measurement
R Equivalent admittance in reflection measurement
R Equivalent admittance in transmission measurement
R Inverse of S-parameter (1/S)
To turn ON/OFF the parameter conversion function, use the following command:
:CALC{1-4}:CONV on page 211
To select the parameter to which you want to convert the measurement result, use the
following command:
:CALC{1-4}:CONV:FUNC on page 212