Installation guide

Chapter 3 33
Troubleshooting
System Recovery
1. Chapter 1
2. Chapter 2
3. Troubleshooting
4. Chapter 4
5. Chapter 5
Figure 3-2 Recover Factory Backup
e5071cse1034
Step 7. When the recovery is finished, click OK. The E5071C restarts automatically.
Step 8. After restart, the screen for initial registration appears. Execute initial registration. For
information on the execution procedure, refer to
“Initial Registration of E5071C” on
page 25.
Step 9. Execute the calibration of the touch screen. For information on the execution procedure,
refer to
“Calibration of the Touch Screen” on page 27.
CAUTION Never turn off the power during the system recovery because doing so may cause
serious damage to the E5071C.