Installation guide

12 Chapter 2
Installation
Contents of this
Chapter
R Checking the Shipment on page 13
After you receive the analyzer, check all the items in the packing container.
R Environmental Requirements on page 14
Describes the system requirements needed to install the E5071C and how to
secure space for heat radiation.
R Installing Front Handles/Rack Mounting Flanges on page 17
Shows how to mount the front handles used to transport the E5071C and how to
install the flanges needed to install it in a rack.
R Connecting the Accessaries on page 20
Provides information for connecting the mouse, keyboard, BNC adaptor to the
E5071C.
R Power Supply on page 21
Shows how to check the power supply as well as check and connect the power
cable.
R Starting the E5071C on page 23
Describes turning on/off of the Power switch and cutting off the power supply.
R Initial Registration of E5071C on page 25
Provides the procedure of intitial registaration for the Windows XP operating
system of the E5071C.
R Calibration of the Touch Screen on page 27
Provides the procedure of touch screen calibration.