User`s guide

Chapter 2 15
Option Installation
System Recovery
Step 6. Select Restore.
Figure 2-5 Activate Acronis Startup Recovery Manager
Step 7. A confirmation dialog box is displayed. Push the enter to select Yes to start the recovery of
the factory backup. The recovery takes a few minutes depending on the amount of data.
Figure 2-6 Recover Factory Backup
Step 8. When the recovery is finished, push the enter select OK. The E5052B restarts
automatically.
Step 9. After restart, the screen for initial registration appears. Execute initial registration. For
information on the execution procedure, refer to
“Initial Registration Procedure (HDD
Revision: NM320 or below)” on page 37.
Step 10. Execute the calibration of the touch screen. For information on the execution procedure,
refer to
“Calibration of the Touch Screen” on page 39.
e5071cse1079
e5052bse1018