Programming instructions

Downloading and Using Files
User File Data Downloads
Chapter 4 177
Selecting Downloaded User Files as the Transmitted Data
Unframed Data
The following front panel key presses or remote commands will select the desired user file
from the catalog of user files as a continuous stream of unframed data for the active TDMA
format or for a custom modulation.
Via the front panel:
1. For a TDMA format, press
Mode > Real Time TDMA > desired format > Data > User File.
For custom modulation, press
Mode > Custom > Real Time I/Q Baseband > Data > User File.
2. Highlight the desired file in the catalog of user files.
3. Press
Select File > desired format Off On or Custom Off On to On.
Via the remote interface:
The following commands activate the desired TDMA format:
[:SOURce]:RADio:<desired format>:DATA "BIT:<file_name>"
[:SOURce]:RADio:<desired format>[:STATe] On
The following commands activate the custom modulation format:
[:SOURce]:RADio:CUSTom:DATA "BIT:<file_name>"
[:SOURce]:RADio:CUSTom[:STATe] On
NOTE To select a user file from binary memory, send the same commands shown in
the above examples without BIT: preceding the file name. For example:
[:SOURce]:RADio:<desired format>:DATA "<file_name>"