Installation guide

Replaceable Parts
Cables for Option 506 Signal Generators
3-68
W72
(Option 1EM)
flexible cable, I IN from the rear panel
to J7 of A10 I/Q Multiplexer
8121-0652
W73
(Option 1EM)
flexible cable, Q IN from the rear panel
to J8 of A10 I/Q Multiplexer
8121-0652
W74
(Option 1EM)
flexible cable, J11 of A10 I/Q Multiplexer
to I OUT of the rear panel
8121-0653
W75
(Option 1EM)
flexible cable, J12 of A10 I/Q Multiplexer
to Q OUT of the rear panel
8121-0653
W76
(Option 1EM)
flexible cable, J13 of A10 I/Q Multiplexer
to I bar OUT of the rear panel
8121-0653
W77
(Option 1EM)
flexible cable, J14 of A10 I/Q Multiplexer
to Q bar OUT of the rear panel
8121-0653
W78
(Option 1EM
and
Option 001
or 002)
flexible cable, J800 of A7 Baseband Generator (Option 001 or Option 002)
to BBG REF IN of the rear panel
8121-0655
W79
(Option 1EM)
flexible cable, J20 of A23 Motherboard
to SWP OUT of the rear panel
8121-0660
W80
(Option 1EM)
flexible cable, DATA IN from the rear panel
to J21 of A23 Motherboard
8121-0660
W81
(Option 1EM)
flexible cable, DATA CLK IN from the rear panel
to J23 of A23 Motherboard
8121-0660
W82
(Option 1EM)
flexible cable, SYMBOL SYNC IN from the rear panel
to J24 of A23 Motherboard
8121-0660
W83
(Option 1EM)
flexible cable, A19 Daughterboard to LF OUT of the rear panel
- refer to the connector diagram located on the daughterboard cover
8121-0656
W87 flexible cable, J10 of A10 I/Q Multiplexer (Option 506) to A19 Daughterboard
- refer to the connector diagram located on the daughterboard cover
8121-0641
W88 flexible cable, J9 of A10 I/Q Multiplexer (Option 506) to A19 Daughterboard
- refer to the connector diagram located on the daughterboard cover
8121-0641
W89 flexible cable, J6 of A10 I/Q Multiplexer (Option 506)
to Q-IN of A19 Daughterboard
- refer to the connector diagram located on the daughterboard cover
8121-0642
W90 flexible cable, J5 of A10 I/Q Multiplexer (Option 506)
to I-IN of A19 Daughterboard
- refer to the connector diagram located on the daughterboard cover
8121-0642
a. When comparing cables W70 and W71 between a model with Option 506 and a model with either
Option 501, 502, 503, 504, or UNJ, notice that cables W70 and W71 are connected to different (swapped)
ports of the A19 Daughterboard.
Table 3-24
Reference
Designator
Description Part Number