Installation guide

Replaceable Parts
Cables for Option 506 Signal Generators
3-65
Option 506 - Semi-Rigid Cables
includes the A21 YTO Driver (Option UNJ or Option 506)
and the AT1 High-Power Mechanical Attenuator (Option UNB)
with an A29 DC Blocking Capacitor (Option 506)
Table 3-23
Reference
Designator
Description Part Number
W11 semi-rigid cable, output of the A16 Frac-N (Option UNJ or Option 506)
to input of the A15 Sampler (Option UNJ or Option 506)
- passes through the A19 Daughterboard
E4400-60622
W31 flexible cable, J20 of A23 Motherboard
to SWEEP OUT of the rear panel
8121-0658
W32 wire cable, J36 of A23 Motherboard
to P4 of A25 Rear Panel Board
8121-0678
W37 semi-rigid cable, Sampler through A19 Daughterboard
to top connector of A21 YTO Driver (Option UNJ or Option 506)
E4423-20510
W38 semi-rigid cable, Frac-N through A19 Daughterboard
to middle connector of A21 YTO Driver (Option UNJ or Option 506)
E4423-20514
W41 semi-rigid cable, output of A16 Frac-N (Option UNJ or Option 506)
to A13 Output (Option UNB)
- passes through the A19 Daughterboard
E4400-60623
W42 semi-rigid cable, output of A13 Output (Option UNB)
to COH CARRIER of the rear panel
- passes through the A19 Daughterboard
E4400-60624
W44 semi-rigid cable, output of A18 Reference (Option UNJ or Option 506)
to A15 Sampler (Option UNJ or Option 506)
- passes through the A19 Daughterboard
E4400-60626
W50 semi-rigid cable, output of A14 Extended Frequency Output (Option 506)
to input of AT1 High-Power Mechanical Attenuator (Option UNB)
- passes through the A19 Daughterboard
E4400-60628
W54 semi-rigid cable, output of YTO
to A22 Coupler (Option 506)
E4400-20560
W55 semi-rigid cable, output of A22 Coupler (Option 506)
to bottom connector of A21 YTO Driver (Option UNJ or Option 506)
E4400-20561
W56 semi-rigid cable, coupled output of A22 Coupler (Option 506)
to input of A14 Extended Frequency Output (Option 506)
- passes through the A19 Daughterboard
E4400-60629
W57 ribbon cable, AT1 High-Power Mechanical Attenuator (Option UNB)
to J25 of A23 Motherboard
E4400-20132
W58 semi-rigid cable, output of A13 Output (Option UNB)
to input of the A14 Extended Frequency Output (Option 506)
- passes through the A19 Daughterboard
E4400-60630