Installation guide

Replaceable Parts
Cables for Option 506 Signal Generators
3-60
Option 506 - Standard Cables
(does not include cables for the front panel, Option UN7, or Option 005)
Table 3-21
Reference
Designator
Description Part Number
W10 ribbon cable, J13 of A7 Baseband Generator (Option 001 or Option 002)
to J3 of A11 Internal Bit Error Rate Analyzer (Option UN7)
to P2 of A25 Rear Panel Board
8121-0679
W11 semi-rigid cable, output of the A16 Frac-N (Option UNJ or Option 506)
to input of the A15 Sampler (Option UNJ or Option 506)
- passes through the A19 Daughterboard
E4400-60622
W12
(Option 001
or 002)
flexible cable, J800 of A7 Baseband Generator (Option 001 or Option 002)
to BASEBAND GEN REF IN of the rear panel
8121-0643
W15 flexible cable, J14 of A10 I/Q Multiplexer (Option 506)
to Q bar OUT of the rear panel
8121-0640
W16 flexible cable, J13 of A10 I/Q Multiplexer (Option 506)
to I bar OUT of the rear panel
8121-0640
W17 flexible cable, J12 of A10 I/Q Multiplexer (Option 506)
to Q OUT of the rear panel
8121-0640
W18 flexible cable, J11 of A10 I/Q Multiplexer (Option 506)
to I OUT of the rear panel
8121-0640
W27 ribbon cable, J2 of A21 YTO Driver (Option UNJ or Option 506)
to J34 of A23 Motherboard
8121-0644
W28 flexible cable, J3 of A21 YTO Driver (Option UNJ or Option 506)
to A19 Daughterboard
- refer to the connector diagram located on the daughterboard cover
8121-0645
W29 flexible cable, J4 of A21 YTO Driver (Option UNJ or Option 506)
to A19 Daughterboard
- refer to the connector diagram located on the daughterboard cover
8121-0645
W30 ribbon cable, J5 of A21 YTO Driver (Option UNJ or Option 506)
to J1 of YTO Interface board
8121-0683
W31 flexible cable, J20 of A23 Motherboard
to SWEEP OUT of the rear panel
8121-0658
W32 wire cable, J36 of A23 Motherboard
to P4 of A25 Rear Panel Board
8121-0678
W50 semi-rigid cable, output of A14 Extended Frequency Output (Option 506)
to input of AT1 High-Power Mechanical Attenuator (Option UNB)
- passes through the A19 Daughterboard
E4400-60628
W57 ribbon cable, AT1 High-Power Mechanical Attenuator (Option UNB)
to J25 of A23 Motherboard
E4400-20132