Installation guide

Replaceable Parts
Cables for Option UNJ Signal Generators
3-37
Cables for Option UNJ Signal Generators
Option UNJ - Overall Cables
(also includes cables for Option UN7, 005, and 001 or 002)
Table 3-12
Reference
Designator
Description Part Number
W1 flexible cable, I INPUT from the front panel to J7 of A10 I/Q Multiplexer 8121-0642
W2 flexible cable, Q INPUT from the front panel to J8 of A10 I/Q Multiplexer 8121-0642
W3 flexible cable, DATA INPUT from the front panel to J21 of A23 Motherboard 8121-0661
W4 flexible cable, DATA CLOCK from the front panel to J23 of A23 Motherboard 8121-0661
W5 flexible cable, SYMBOL SYNC from the front panel to J24 of A23
Motherboard
8121-0661
W6
a
flexible cable, EXT 1 INPUT of front panel to EXT 1 on A19 Daughterboard
- refer to the connector diagram located on the daughterboard cover
8121-0644
W7
a
flexible cable, EXT 2 INPUT of front panel to EXT 2 on A19 Daughterboard
- refer to the connector diagram located on the daughterboard cover
8121-0644
W8 flexible cable, LF OUTPUT from the front panel to A19 Daughterboard
- refer to the connector diagram located on the daughterboard cover
8121-0657
W10 ribbon cable, J13 of A7 Baseband Generator (Option 001 or Option 002)
to J3 of A11 Internal Bit Error Rate Analyzer (Option UN7)
to P2 of A25 Rear Panel Board
8121-0679
W11 semi-rigid cable, output of the A16 Frac-N (Option UNJ or Option 506)
to input of the A15 Sampler (Option UNJ or Option 506)
- passes through the A19 Daughterboard
E4400-60622
W12
(Option 001
or 002)
flexible cable, J800 of A7 Baseband Generator (Option 001 or Option 002)
to BASEBAND GEN REF IN of the rear panel
8121-0643
W15 flexible cable, J14 of A10 I/Q Multiplexer (Option 501, 502, 503, 504 or
Option UNJ)
to Q bar OUT of the rear panel
8121-0640
W16 flexible cable, J13 of A10 I/Q Multiplexer (Option 501, 502, 503, 504 or
Option UNJ)
to I bar OUT of the rear panel
8121-0640
W17 flexible cable, J12 of A10 I/Q Multiplexer (Option 501, 502, 503, 504 or
Option UNJ)
to Q OUT of the rear panel
8121-0640
W18 flexible cable, J11 of A10 I/Q Multiplexer (Option 501, 502, 503, 504 or
Option UNJ)
to I OUT of the rear panel
8121-0640