Installation guide

Replaceable Parts
Cables for Option 501, 502, 503, 504 Signal Generators
3-32
Option 501, 502, 503, 504 - Option 1EM Overall Cables
(also includes cables for Option UN7, 300, 005, and 001 or 002)
Table 3-10
Reference
Designator
Description Part Number
W10 ribbon cable, J13 of A7 Baseband Generator (Option 001 or Option 002)
to J3 of A9 Digital Demodulator (Option 501, 502, 503, 504 with Option 300)
to J3 of A11 Internal Bit Error Rate Analyzer (Option UN7)
to P2 of A25 Rear Panel Board
8121-0679
W13
(Option 300)
flexible cable, J4 of A9 Digital Demodulator (Option 501, 502, 503, 504 with
Option 300)
to A20 Downconverter (Option 501, 502, 503, 504 with Option 300)
8121-0651
W14
(Option 300)
flexible cable, J5 of A9 Digital Demodulator (Option 501, 502, 503, 504 with
Option 300)
to A20 Downconverter (Option 501, 502, 503, 504 with Option 300)
8121-0651
W19 flexible cable, J10 of A10 I/Q Multiplexer (Option 501, 502, 503, 504 or
Option UNJ)
to Q IN of A19 Daughterboard
- refer to the connector diagram located on the daughterboard cover
8121-0641
W20 flexible cable, J9 of A10 I/Q Multiplexer (Option 501, 502, 503, 504 or
Option UNJ)
to I IN of A19 Daughterboard
- refer to the connector diagram located on the daughterboard cover
8121-0641
W23
(Option UN7)
flexible cable, J4 of A11 Internal Bit Error Rate Analyzer (Option UN7)
to BERDATAIN of the rear panel
8121-0659
W24
(Option UN7)
flexible cable, J5 of A11 Internal Bit Error Rate Analyzer (Option UN7)
to BER CLK IN of the rear panel
8121-0659
W25
(Option UN7)
flexible cable, J6 of A11 Internal Bit Error Rate Analyzer (Option UN7)
to BER GATE IN of the rear panel
8121-0659
W26
(Option 005)
ribbon cable, A5 10 GB Hard Drive (Option 005)
to P3 of A12 CPU
8121-0685
W32 wire cable, J36 of A23 Motherboard
to P4 of A26 Rear Panel LVDS Board (Option 1EM)
8121-0678
W40 ribbon cable, AT1 Electronic Attenuator (Option 501, 502, 503, 504 or
Option UNJ)
to J25 of A23 Motherboard
8121-6837
W43 semi-rigid cable, output of A13 Output (Option 501, 502, 503, 504 or
Option UNJ)
to input of AT1 Electronic Attenuator (Option 501, 502, 503, 504 or
Option UNJ)
- passes through the A19 Daughterboard
E4400-60625
W63
(Option 300)
ribbon cable, A20 Downconverter (Option 501, 502, 503, 504 with
Option 300)
to J26 of A23 Motherboard
8121-0682