Installation guide

Replaceable Parts
Cables for Option 501, 502, 503, 504 Signal Generators
3-28
Option 501, 502, 503, 504 - Only Option UN7, 300, 005, and 001 or 002 Cables
Table 3-8
Reference
Designator
Description Part Number
W10 ribbon cable, J13 of A7 Baseband Generator (Option 001 or Option 002)
to J3 of A9 Digital Demodulator (Option 501, 502, 503, 504 with Option 300)
to J3 of A11 Internal Bit Error Rate Analyzer (Option UN7)
to P2 of A25 Rear Panel Board
8121-0679
W12
(Option 001
or 002)
flexible cable, J800 of A7 Baseband Generator (Option 001 or Option 002)
to BASEBAND GEN REF IN of the rear panel
8121-0643
W13
(Option 300)
flexible cable, J4 of A9 Digital Demodulator (Option 501, 502, 503, 504 with
Option 300)
to A20 Downconverter (Option 501, 502, 503, 504 with Option 300)
8121-0651
W14
(Option 300)
flexible cable, J5 of A9 Digital Demodulator (Option 501, 502, 503, 504 with
Option 300)
to A20 Downconverter (Option 501, 502, 503, 504 with Option 300)
8121-0651
W23
(Option UN7)
flexible cable, J4 of A11 Internal Bit Error Rate Analyzer (Option UN7)
to BERDATAIN of the rear panel
8121-0659
W24
(Option UN7)
flexible cable, J5 of A11 Internal Bit Error Rate Analyzer (Option UN7)
to BER CLK IN of the rear panel
8121-0659
W25
(Option UN7)
flexible cable, J6 of A11 Internal Bit Error Rate Analyzer (Option UN7)
to BER GATE IN of the rear panel
8121-0659
W26
(Option 005)
ribbon cable, A5 10 GB Hard Drive (Option 005)
to P3 of A12 CPU
8121-0685
W63
(Option 300)
ribbon cable, A20 Downconverter (Option 501, 502, 503, 504 with
Option 300)
to J26 of A23 Motherboard
8121-0682
W64
(Option 300)
flexible cable, A20 Downconverter (Option 501, 502, 503, 504 with
Option 300)
to 321.4 IN of the rear panel
8121-0650