Installation guide

Replaceable Parts
Cables for Option 501, 502, 503, 504 Signal Generators
3-24
Option 501, 502, 503, 504 - Front Panel Cables
Table 3-6
Reference
Designator
Description Part Number
W1 flexible cable, I INPUT from the front panel to J7 of A10 I/Q Multiplexer 8121-0642
W2 flexible cable, Q INPUT from the front panel to J8 of A10 I/Q Multiplexer 8121-0642
W3 flexible cable, DATA from the front panel to J21 of A23 Motherboard 8121-0661
W4 flexible cable, DATA CLOCK from the front panel to J23 of A23 Motherboard 8121-0661
W5 flexible cable, SYMBOL SYNC from the front panel to J24 of A23
Motherboard
8121-0661
W6
a
a. When comparing cables W6 and W7 between a model with Option 506 and a model with either
Option 501, 502, 503, 504, or UNJ, notice that cables W6 and W7 are connected to different (swapped)
ports of the A19 Daughterboard.
flexible cable, EXT 1 INPUT of front panel to EXT 1 on A19 Daughterboard
- refer to the connector diagram located on the daughterboard cover
8121-0644
W7
a
flexible cable, EXT 2 INPUT of front panel to EXT 2 on A19 Daughterboard
- refer to the connector diagram located on the daughterboard cover
8121-0644
W8 flexible cable, LF OUTPUT from the front panel to A19 Daughterboard
- refer to the connector diagram located on the daughterboard cover
8121-0657